Parts That Fix Frigidaire Refrigerator FRS6HR45KS0 Leaking
Leaking is a commonly reported symptom for the FRS6HR45KS0 Frigidaire Refrigerator, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your FRS6HR45KS0 Frigidaire Refrigerator that will fix Leaking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when activated, and send it through to your water dispenser or ice maker in your refrigerator. The water inlet valve is located at the back of the refrigerator, and connects to the water supply. The valve can break from material fatigue or normal use. If your water inlet valve is malfunctioning, you could be getting a lack of water to the inside of your refrigerator. Your ice maker may not produce cubes or your water dispenser may not work. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. This valve measures approximately 7 inches long and 4.5 inches wide, and is constructed of plastic and metal. It comes in blue, and includes the valve and mounting bracket.
Replacing your Frigidaire Refrigerator Refrigerator Water Inlet Valve
Customer Repair Stories
icemaker stopped making ice
A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t ... Read more he maker dumped the ice into the bin.
-
David from New Bern, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
water leaking out of refrigerator
-
Jose from Alexandria, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Wrench (Adjustable)
O-Ring is not included with this part. Does not come with Elbow Connectors.
Customer Repair Stories
Refrigerator was in storage over the winter and the housing froze and broke.
-
Steven from Washington, IA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Housing that the water filter was cracked. I think ,setting was too cold and froze and cracked it.
-
Leonard from Burlington, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
O-ring for water filter housing.
Customer Repair Stories
Leaking water filter cup
-
Bobby from Mckinney, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
This OEM cup filter is designed to be compatible with all rear-filter refrigerators made before April 2001. The filter fits into a round white plastic housing. For this repair you may also require the PS428513 wrench or PS428532 O-ring. To install you will need to unscrew the cup before you can see the old filter, and then dump the water. Pull the old filter straight down and place the new filter inside the filter cup. The end of the filter with the O-ring should be directed upward. As you tighten the filter it will align itself. If your refrigerator has a Change Filter light, it will need to be reset. Press and hold this button until the green light flashes (up to 15 seconds). This filter has a 2-Inch depth, 4.25-Inch height, 2-Inch width and needs to be replaced every 6 months of use or 200 gallons depending on which comes first. Filters for: Taste and odor Sediment 99.3% of Lead 99.99% of Cysts 99.7% of Turbidity 99.8% of Particulates (Class I) 94.9% of Atrazine (a herbicide) 94.2% of 2,4-D (a herbicide) 97.8% of Chlorine (Class I) 87.5% of Toxaphene (a pesticide).
Replacing your Frigidaire Refrigerator Water Filter
Customer Repair Stories
water from refigerator dispenser started tasting bad
-
Anthony from Springfield, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Water in Frig was tasting bad.
-
Patricia from Fulton, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
The filter is NOT included and the o-ring is also sold separately.
Plastic tube, 5/16".
This is a water fill tube which is used in refrigerators. It attaches to the water inlet valve and supplies water to the components in your appliance that need it, such as the icemaker and water dispenser. You will need to replace your fill tube if you notice it is leaking or damaged. This replacement tube is approximately 7 inches in length, and it is made entirely of plastic. The fill tube is sold individually. Before you begin repairing your refrigerator, make sure the water supply has been turned off and that the appliance has been unplugged.
Customer Repair Stories
Water Tube That Fills Ice Maker Leaking Water
-
PAT from BATON ROUGE, LA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Ice Maker not getting any water
-
Lawrence from Stow, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
This part is only necessary if the filter housing is stuck.
This part works in conjunction with the ice chute door.
Replacing your Frigidaire Refrigerator Ice Dispenser Door Seal
Bucket only. All other parts sold separately.
Replacing your Frigidaire Refrigerator Ice Container/Bucket
Customer Repair Stories
A 2" x 4" section on the bottom of the ice container bucket broke out.
-
David from Owensboro, KY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
There was a hole in the plastic bin where ice fell through to the freezer.
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refr ... Read more igerator.
It took me about 5 to 10 minutes. It's really easy!
-
Thomas from Niceville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
This supplies water to the icemaker and dispenser.
Customer Repair Stories
Not making ice
-
Sam from Ravenswood, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench set
This door bin (Bottom Door Bin, Refrigerator Door Bin, Door Shelf Bin, Refrigerator Door Bin) is a movable bin mounted on the inner door to hold food items, bottles, and jars. Over time, a cold refrigerator can cause plastic to become fragile and break down. This can lead to other issues in the refrigerator. When the door bin will not hold securely onto the inner door panel, it must be replaced. This door bin measures 5.75 inches high, 16 inches wide, by 4.25 inches deep and is made of white plastic. Sold individually.
Customer Repair Stories
broken door shelf bin
-
Elsie from Effingham, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
I broke the bottom door shelf by "forcing" in too many jars
-
Marc from Oberlin, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.
Replacing your Frigidaire Refrigerator Water Dispenser Actuator
Customer Repair Stories
I broke the lever that you npush to get water.
-
Darryl from Sciotoville, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Broken actuator-water
Thanks.
-
Wesley from New Smyrna Beach, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
Customer Repair Stories
Ice Maker stopped working
-
Dennis from DEER LODGE, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Broken ice maker
-
Juan from Miami, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set