Parts That Fix Frigidaire Refrigerator FFSS2615TS5 Ice maker not making ice
Ice maker not making ice is a commonly reported symptom for the FFSS2615TS5 Frigidaire Refrigerator, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your FFSS2615TS5 Frigidaire Refrigerator that will fix Ice maker not making ice. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when activated, and send it through to your water dispenser or ice maker in your refrigerator. The water inlet valve is located at the back of the refrigerator, and connects to the water supply. The valve can break from material fatigue or normal use. If your water inlet valve is malfunctioning, you could be getting a lack of water to the inside of your refrigerator. Your ice maker may not produce cubes or your water dispenser may not work. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. This valve measures approximately 7 inches long and 4.5 inches wide, and is constructed of plastic and metal. It comes in blue, and includes the valve and mounting bracket.
Replacing your Frigidaire Refrigerator Refrigerator Water Inlet Valve
Customer Repair Stories
icemaker stopped making ice
A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t ... Read more he maker dumped the ice into the bin.
-
David from New Bern, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
water leaking out of refrigerator
-
Jose from Alexandria, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Wrench (Adjustable)
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire side-by-side models after 2009 that use a water filter located in the back, top right. Filters all dispensed drinking water and the water used for making ice. It minimizes chlorine flavor and smell and cuts down on common contaminants by 99 percent. You will need to replace the filter every six months or when the light indicates. To install the new filter slide it into the housing and push until it locks in place. Press the indicator button for ten seconds to reset after replacing.
Customer Repair Stories
change water filter
-
George from EDGEFIELD, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
Ice maker not working good
-
Bob G from ANTHONY, KS
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
This assembly includes the auger and blades.
Replacing your Frigidaire Refrigerator Ice Container and Auger Assembly
Customer Repair Stories
The in the door ice dispencer would not dispense ice since the auger wasn't working properly to push the ice through the door.
-
Thomas from Pineville, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Ice dispencer would not work
I really did not know what was wrong with the unit, so I was pleased to find an entire assembly for a lot less that an in-ho ... Read more me repair would have cost. The part arrived early in it's estimated time table. I simply pulled out the old unit slid in the new, transferred the ice into the new unit and that was it. I was up and running, my wife was thrilled and I was a hero. THANKS!!!
-
Richard from Bristol, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is to shield the ice crushing blades within the ice container. To make this repair you will need a Phillips screwdriver, a flat blade screwdriver, a quarter-inch nut driver, and a pair of channel lock pliers. For this installation, work gloves are recommended. Note that this piece may look different or be a different color than the original, but this part will fit and function in the same way as the original part.
Replacing your Frigidaire Refrigerator Dispenser Crusher Housing
Customer Repair Stories
Original gate broke at the swivel point
This is the 3rd time I have attemped and successfully repaired major home appliances myself after the warrenty ran out. I'm sure I could buy a new appliance for the money I saved.
-
Charles from New Orleans, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Ice Crusher Broke. Plastic in Ice Tray
-
Ronald from Dickson, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Bucket only. All other parts sold separately.
Replacing your Frigidaire Refrigerator Ice Container/Bucket
Customer Repair Stories
A 2" x 4" section on the bottom of the ice container bucket broke out.
-
David from Owensboro, KY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
There was a hole in the plastic bin where ice fell through to the freezer.
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refr ... Read more igerator.
It took me about 5 to 10 minutes. It's really easy!
-
Thomas from Niceville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.
Replacing your Frigidaire Refrigerator DRIVE BLADE
Customer Repair Stories
Ice was not allowed to be dispensed because of worn part on auger.
-
Craig from AIKEN, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
ice maker would not rotate out cube or crushed ice.
2. Revove (1) U type nut keeper & (1) metal washer.
3. Remove (1) plastic nut on end of metal auger.
4. Remove inner plastic cover (4) screws and disconnect control rod. (Note postion of control rod befor disconnecting)
5. Note position an ... Read more d order of metal blades and plastic spacers on auger before siding off the end of auger to reposition them upon re-assembly.
6. Remove metal support panel from end of ice bucket (4) screws.
7. Remove auger & plastic cylinder from ice bucket.
8. Remove - slide drive blade off auger.
9. Drive blade replaced.
10. Re-assembled other items removed in reverse order
-
David from Ponca City, OK
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
This part helps push the ice through the front plate to be crushed.
Replacing your Frigidaire Refrigerator Ice Dispenser Drum
Customer Repair Stories
Broken Drum
-
Jubal from OZARK, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
The drum ice maker broke in half so it couldn't dependent the ice.
-
ROWENA from WIGGINS, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
This is a water fill tube which is used in refrigerators. It attaches to the water inlet valve and supplies water to the components in your appliance that need it, such as the icemaker and water dispenser. You will need to replace your fill tube if you notice it is leaking or damaged. This replacement tube is approximately 7 inches in length, and it is made entirely of plastic. The fill tube is sold individually. Before you begin repairing your refrigerator, make sure the water supply has been turned off and that the appliance has been unplugged.
Customer Repair Stories
Water Tube That Fills Ice Maker Leaking Water
-
PAT from BATON ROUGE, LA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Ice Maker not getting any water
-
Lawrence from Stow, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
The cube solenoid allows cube or crushed ice to be dispensed on demand. 120V 60Hz
Replacing your Frigidaire Refrigerator Refrigerator Ice Dispenser Solenoid
Customer Repair Stories
ice maker is stuck on crushed ice.
-
Mary from MAGNOLIA, AR
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
Ice maker wouldn't change from crushed to cubed ice
-
robert from sioux falls, SD
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
This is the replacement water filter base for your refrigerator. It is approximately 3-1/2 inches by 3 inches. It is made of white plastic with two blue water filter receptacles. The water filter base connects to your refrigerator and is the part that your two-headed water filter fits into. The main reason you would want to replace it is if you notice a leak when you connect the water filter, or if it is noticeably cracked or damaged. This part is sold individually and is a genuine OEM part.
Customer Repair Stories
Filter wouldn't engage
-
Dennis from OLATHE, KS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Water filter would not disconnect from OEM Water Filter Base
-
Richard from SEATTLE, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers