Models > F1378FYN

F1378FYN LG Washer - Overview

Sections of the F1378FYN

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve - Hot – Part Number: 5220FR2006H
Water Inlet Valve - Hot
★★★★★
★★★★★
(82)
PartSelect #: PS3527427
Manufacturer #: 5220FR2006H
The hot water inlet valve on your washing machine controls the water flow into the washer. This inlet valve has a standard hose fitting inlet and one water outlet. The water inlet valve opens to allow...
$26.80
  In Stock
Magnetic Door Plunger – Part Number: AGM73610701
Magnetic Door Plunger
★★★★★
★★★★★
(61)
PartSelect #: PS3618292
Manufacturer #: AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door ...
$24.28
  In Stock
Tub-to-Pump Drain Hose – Part Number: 4738ER1002A
Tub-to-Pump Drain Hose
★★★★★
★★★★★
(16)
PartSelect #: PS3523345
Manufacturer #: 4738ER1002A
This is a tub-to-pump drain hose for a front load washer. The hose features flexible bellows which allow it to expand and contract when necessary. It carries the water from the tub of the washer to th...
$41.72
  In Stock
Gasket – Part Number: 4036ER4001B
Gasket
★★★★★
★★★★★
(6)
PartSelect #: PS3522859
Manufacturer #: 4036ER4001B
This is a seal for a washer tub. It creates a seal between the front and rear halves of the washer tub to prevent the appliance from leaking. If you notice leakage between the two sections of the tub,...
$31.60
  In Stock
Detergent Dispenser – Part Number: 3891ER2003A
Detergent Dispenser
★★★★★
★★★★★
(17)
PartSelect #: PS3522644
Manufacturer #: 3891ER2003A
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
$27.79
  In Stock
Washer Hose with Bellows – Part Number: 4738ER1004B
Washer Hose with Bellows
★★★★★
★★★★★
(6)
PartSelect #: PS3523347
Manufacturer #: 4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
$31.32
  In Stock
Washer Tub Bearing – Part Number: MAP61913708
Washer Tub Bearing
★★★★★
★★★★★
(1)
PartSelect #: PS11711139
Manufacturer #: MAP61913708
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
$48.20
  In Stock
Locking Pin – Part Number: 4774FR3118B
Locking Pin
★★★★★
★★★★★
(2)
PartSelect #: PS3523451
Manufacturer #: 4774FR3118B
This is a locking pin, and it works in conjunction with your washer. The part measures to be roughly 3 inches long, and less than an inch wide. The pin is cylindrical, off-white in color, and made ent...
$14.48
  Special Order
Spring,Hinge – Part Number: 4970FR2084Z
Spring,Hinge
★★★★★
★★★★★
(7)
PartSelect #: PS3524578
Manufacturer #: 4970FR2084Z
This is a suspension spring for models of LG washing machines. This spring, along with the shock absorbers, is the entire suspension of the washing machine. If your washing machine is having spinning ...
$29.45
  In Stock
BOLT ASSEMBLY – Part Number: FAA31690703
BOLT ASSEMBLY
★★★★★
★★★★★
(2)
PartSelect #: PS10058954
Manufacturer #: FAA31690703
This shipping bolt is an OEM part that holds the tub and basket of your washer steady during transport, stopping them from moving around and getting damaged. You will usually find these bolts at the b...
$16.69
  In Stock
Shock Absorber – Part Number: 383EER3001V
Shock Absorber
PartSelect #: PS3522317
Manufacturer #: 383EER3001V
  No Longer Available
Hose – Part Number: 4738ER2002A
Hose
★★★★★
★★★★★
(1)
PartSelect #: PS3523351
Manufacturer #: 4738ER2002A
$27.20
  In Stock

Questions And Answers for F1378FYN

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the F1378FYN

[Viewing 7 of 7]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Parts Used:
Magnetic Door Plunger
  • Omnitech from Warrenville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
153 of 169 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking tub-to-pump drain hose
Pull washer away from wall. Unplug cord and remove drain hose from receptacle. Remove 4 screws holding panel to rear of washer. Squeeze and slide back hose clamps on each end of drain hose and loosen center clamp with screwdriver. Remove old hose. Reinstall new hose in reverse order using existing clamps. Re-install back panel.
Parts Used:
Tub-to-Pump Drain Hose
  • Leslie from STOWE, VT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
46 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was filling continues even the machine was unplugged
I did repaired while looking at video at your site .thanks to your team ..
Parts Used:
Water Inlet Valve - Hot
  • Sanjay from HOLTSVILLE, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
20 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!