Models > EZ5426

EZ5426 Husqvarna - Overview

Models starting with EZ5426

Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
  In Stock
Bolt and Washer Assembly – Part Number: 532193003
Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.
$8.71
  In Stock
Idler Pulley, Flat – Part Number: 539110311
Idler Pulley, Flat
★★★★★
★★★★★
(1)
PartSelect #: PS9031679
Manufacturer #: 539110311
This is an OEM replacement part for various models of lawn mowers. The Idler Pulley is used to apply tension to the blade belt, allowing the belt to turn. It has an O.D. of approx. 2.75 inches, is ma...
$13.69
  In Stock
Washer-Spacer – Part Number: 532187690
Washer-Spacer
PartSelect #: PS9286886
Manufacturer #: 532187690
$3.99
  In Stock
Screw – Part Number: 532137729
Screw
PartSelect #: PS9009676
Manufacturer #: 532137729
$4.99
  In Stock
Mandrel Assembly – Part Number: 587820301
Mandrel Assembly
PartSelect #: PS12116539
Manufacturer #: 587820301
This mandrel assembly is for lawn tractors. Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete lis...
$48.56
  In Stock
Bolt-Shoulder – Part Number: 532193406
Bolt-Shoulder
PartSelect #: PS9016060
Manufacturer #: 532193406
  No Longer Available
PTO Switch – Part Number: 582107601
PTO Switch
★★★★★
★★★★★
(1)
PartSelect #: PS11824426
Manufacturer #: 582107601
$13.69
  In Stock
Pulley, Mandrel – Part Number: 532173436
Pulley, Mandrel
PartSelect #: PS9014454
Manufacturer #: 532173436
$11.20
  In Stock
Nut-Push – Part Number: 532110452
Nut-Push
PartSelect #: PS9285696
Manufacturer #: 532110452
The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold ...
$3.99
  In Stock
Wheel Gage Donut Wide – Part Number: 532133957
Wheel Gage Donut Wide
PartSelect #: PS9010538
Manufacturer #: 532133957
$14.93
  In Stock
Switch Ignition – Part Number: 532175566
Switch Ignition
PartSelect #: PS9286662
Manufacturer #: 532175566
$13.69
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Deflector shield cracked. Need to replace.
Mark the location of the spring so you know how it goes on. Snip off the push nut holding the deflector shield pin. Hammer the pin out. Insert the pin with the spring holding the new deflector shield. Use a socket to steady the push nut and hammer the pin into the push net until secure.
Parts Used:
Nut-Push Deflector Shield
  • Travis from PLATTE CITY, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!