Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EIDW6105GW1A > Instructions

EIDW6105GW1A Electrolux Dishwasher - Instructions

All installation instructions for EIDW6105GW1A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the EIDW6105GW1A
1-15 of 15
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken door on dispenser

  • Customer: Justin from Miami, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 15 people found this instruction helpful
The only difficultpart was to figure out how to remove the stainless cover from the door. Seems it slides upwards after screws are removed. After that it is self explainatory and goes back together in 5 minutes.

Bottom of silverware basket was broken.

  • Customer: Marvin from LITTLETON, CO
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Ordered new basket from this site. Very easy at reasonable cost. Thanks for having the parts we needed.

The brackets on the lower rack had worn out and not holding up the tines.

  • Customer: Alan from Gladstone, OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
The parts came in a timely manner and took about 15 minuets to replace with no tools.

The sensor showed an E1 leak which is "water underneath the machine"

  • Customer: Don from HOPATCONG, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 1 of 6 people found this instruction helpful
Went to the website, viewed the schematic and ordered the two gaskets that form the seal around the door and tub, Gaskets should be ordered as a set if you have a leak and suspect the door. We saw discoloration at the bottom edge of the tub gasket indicating that there was water seeping through out onto the floor.The gaskets install by hand without the use of tools. Less than $100 in parts prevented the replacement of a $1,400 dishwasher.

No water flow

  • Customer: Craig from Yuma, AL
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
  • 0 of 0 people found this instruction helpful
Changed out Motor and Pump also canged out control box but no joy

Broken bracket

  • Customer: Tracie from Tyler, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Easily removed the broken bracket and snapped the new one in its place. Took less than 30 seconds!

The center spray arm with manifold was warped and did not spin when the dishwasher was running.

  • Customer: Melissa from Black Hawk, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
We snapped the broken spray arm off, and snapped the new arm on. We had to use the screw driver as leverage to snap on new spray arm.
All Instructions for the EIDW6105GW1A
1-15 of 15