Models
>
CTH171
CTH171 Husqvarna Lawn Tractor - Overview
Models starting with CTH171
Click on the best match to narrow your results.
- CTH171 ( 96061000400,954170209 2005-01 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061007000,960610070 2006-03 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061007001,960610070 2006-06 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018300 2007-04 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018301 2007-05 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018302 2007-05 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018303 2008-02 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018304 2009-03 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018400 2007-04 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018401 2007-06 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018402 2007-05 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018403 2008-01 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018404 2008-11 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061018404 2009-03 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061027700 2010-01 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061027701 2010-02 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( 96061027800 2010-01 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( HECTH171A,954170209 2004-01 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( HECTH171B,954170209 2004-06 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( HECTH171C,954170209 2004-06 ) Husqvarna Lawn Tractor (Tractor)
- CTH171 ( HECTH171D,954170209 2004-06 ) Husqvarna Lawn Tractor (Tractor)
Keep searches simple, eg. "belt" or "pump".
Bearing
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.21
In Stock
Ring Klip Number T5304-75
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$3.99
In Stock
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock
Washer 25/32 x 1-1/4 x 16 Ga.
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
In Stock
Cap Axle Black 1 50 x 1 00
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.99
In Stock
Blade Mower
PartSelect #: PS9286056
Manufacturer #: 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
$16.18
In Stock
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
In Stock
Switch-Ign
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$14.93
On Order
Clip, Hairpin
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$3.99
In Stock
Common Symptoms of models starting with CTH171
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it function
... Read more
s properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Read less
Parts Used:
-
Lynn from BOILING SPGS, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
17 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Parts Used:
-
Anthony from OLIVEHILL, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more r, ..... and you know the rest.
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact drive ... Read more r, ..... and you know the rest.
Read less
Parts Used:
-
Trace from LISLE, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!