Models > CTH150

CTH150 Husqvarna - Overview

Models starting with CTH150

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Bearing – Part Number: 532009040
Bearing
★★★★★
★★★★★
(3)
PartSelect #: PS9006914
Manufacturer #: 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft....
$6.21
  In Stock
Ring Klip Number T5304-75 – Part Number: 812000029
Ring Klip Number T5304-75
★★★★★
★★★★★
(1)
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It i...
$3.99
  In Stock
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
  In Stock
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
  In Stock
Cap Axle Black 1 50 x 1 00 – Part Number: 532104757
Cap Axle Black 1 50 x 1 00
★★★★★
★★★★★
(1)
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.99
  In Stock
Blade Mower Hi Lift – Part Number: 532405380
Blade Mower Hi Lift
★★★★★
★★★★★
(1)
PartSelect #: PS9017804
Manufacturer #: 532405380
$23.87
  In Stock
V-Belt-Drive – Part Number: 532130969
V-Belt-Drive
★★★★★
★★★★★
(1)
PartSelect #: PS9009376
Manufacturer #: 532130969
  No Longer Available
Washer Hardened – Part Number: 532188967
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
  In Stock
Switch-Ign – Part Number: 532193350
Switch-Ign
★★★★★
★★★★★
(2)
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$14.93
  On Order
V-Belt – Part Number: 584453101
V-Belt
PartSelect #: PS9982769
Manufacturer #: 584453101
This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction ...
$46.41
  In Stock
Bearing-Ball-Mandrel – Part Number: 532110485
Bearing-Ball-Mandrel
★★★★★
★★★★★
(1)
PartSelect #: PS9285698
Manufacturer #: 532110485
$11.20
  In Stock
Clip, Hairpin – Part Number: 532003146
Clip, Hairpin
PartSelect #: PS9007536
Manufacturer #: 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1....
$3.99
  In Stock

Common Symptoms of models starting with CTH150

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drive belt came off from transaxle pulley, noticed in bad shape, ordered new one form parts select.
The drive belt literally goes from the back of the tractor to the front. The mower must be removed, helps to have the tractor up on blocks to give adequate room for work on underside. Belt goes easiest on the engine first, then thread to the rear, install on the rear, (driven pulley) then on the idlers. Check to assure that it functions properly before re-installing the mower. If you have the owners manual, there is a diagram, (check your orientation, it is not clear if it is a birdseye or under tractor view) which offered some help. When replacing belt, check the transaxle front mount, mine was broken which is why the belt came off in the first place. Repairing the mount was quite a job in itself, but now works fine.
Parts Used:
V-Belt-Drive
  • Lynn from BOILING SPGS, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
17 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
Ring Klip Number T5304-75 Cap Axle Black 1 50 x 1 00
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
12 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Parts Used:
Key
  • Gary from PILESGROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!