Models > CDU300CWWP1199011W

CDU300CWWP1199011W Caloric Dishwasher - Overview

Sections of the CDU300CWWP1199011W

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WPW10348409
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS11753384
Manufacturer #: WPW10348409
Sold individually.
$7.76
  In Stock
Order within the next 7 hrs and your part ships today!
Screw Kit – Part Number: R9800670
Screw Kit
★★★★★
★★★★★
(1)
PartSelect #: PS1731746
Manufacturer #: R9800670
Includes 2 screws.
$3.90
  In Stock
Order within the next 7 hrs and your part ships today!
WHEEL – Part Number: W10542232
WHEEL
PartSelect #: PS5573993
Manufacturer #: W10542232
  No Longer Available
Screw - 6-32 x 5/16 – Part Number: WP74004005
Screw - 6-32 x 5/16
PartSelect #: PS11744050
Manufacturer #: WP74004005
This screw is well under an inch long, and is made of metal.
$4.12
  In Stock
Order within the next 7 hrs and your part ships today!
Screw, Ground – Part Number: WP3351614
Screw, Ground
PartSelect #: PS11741183
Manufacturer #: WP3351614
$4.24
  In Stock
Order within the next 7 hrs and your part ships today!
Clamp – Part Number: WP696392
Clamp
PartSelect #: PS11743796
Manufacturer #: WP696392
$4.51
  In Stock
Order within the next 7 hrs and your part ships today!
Tub Baffle - left side – Part Number: 2045-0006
Tub Baffle - left side
PartSelect #: PS2017090
Manufacturer #: 2045-0006
This tub baffle is two inches long. It is all black in color and is made entirely of plastic. This baffle is intended for use with some dishwashers.   No Longer Available
DISCONTINUED – Part Number: 2045-0005
DISCONTINUED
PartSelect #: PS2017089
Manufacturer #: 2045-0005
  No Longer Available
Lower Front Wheel – Part Number: WP2955-0007
Lower Front Wheel
PartSelect #: PS11740619
Manufacturer #: WP2955-0007
  No Longer Available
Door Spring Cable – Part Number: WPY03000108
Door Spring Cable
★★★★★
★★★★★
(1)
PartSelect #: PS11757443
Manufacturer #: WPY03000108
This door spring cable is nine inches long. It is made of metal and is used for some dishwashers.   No Longer Available

Questions And Answers for CDU300CWWP1199011W

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the CDU300CWWP1199011W

[Viewing 1 of 1]
Leaking
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Two upper rack rollers were broken
Used ascrewdriver to bend the metal rail that the roller rolls on. The part that needed to be bent holds the end cap on. Once bent, the end cap pops off. The the old roller can be removed and the new roller instsalled. The rail then needs to be re-bent.
Parts Used:
WHEEL
  • Duane from Seattle, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper rack roller cracked then broke
First removed the end cover and clip on the end of the rack slide. Used a flat head screwdriver to push in the clip and carefully pried it out. Then using the same screwdriver, pried up on the rack roller clip attached to the dish rack. Once clip was free of the rack, slid the rack roller off through the front of the slider. Slid the new rack roller into the slider and snapped the roller clip onto the dish rack in the same place the old one was. Carefully twisted the plastic end cover and clip back onto the rack slider. Job complete. The trickest part of the job is removing the rack slider end cover.
Parts Used:
WHEEL
  • Jeffrey from Wilson, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original wheels were broken
I first removed the rail end caps by bending open the rail ends. They easily come off. The wheels slide out of the rack and the part snapped on to the rack removed. I used a screw driver to pry them off. New wheels are slid into the rail and snapped to the rack. End caps put back into place and rail tips bent back. Very easy.
Parts Used:
WHEEL
  • Todd from Powell, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!