Models > C2S980SEM1SS > Symptoms > Little to no heat when baking

Parts That Fix General Electric Range C2S980SEM1SS Little to no heat when baking

Little to no heat when baking is a commonly reported symptom for the C2S980SEM1SS General Electric Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your C2S980SEM1SS General Electric Range that will fix Little to no heat when baking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Bake Element - Push On Terminals - 240V
Fixes Symptom 90% of time
Bake Element - Push On Terminals - 240V – Part Number: WB44K10005
★★★★★
★★★★★
91 Reviews

Rated by 36 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.

$ 122.85
  In Stock
PartSelect Number PS249238
Manufacturer Part Number WB44K10005

Replacing your General Electric Range Bake Element - Push On Terminals - 240V

Replacing your Bake Element - Push On Terminals - 240V

Customer Repair Stories

Broken heating element

1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of the oven
7)screw botls back into the oven holding the heating element in place
8)Turn power back on
Read less
  • Paul from anna, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
73 of 85 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Lower bake Element would not heat.

First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
  • Ronald from Nassau, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
221 of 245 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 Temperature Sensor Kit
Fixes Symptom 10% of time
Temperature Sensor Kit – Part Number: WB23X5340
★★★★★
★★★★★
8 Reviews

Rated by 6 customers 

  

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.   

This kit includes the sensor as well as the connectors. NOTE This sensor is 2" long.

$ 208.65
  In Stock
PartSelect Number PS236490
Manufacturer Part Number WB23X5340

Replacing your General Electric Range Temperature Sensor Kit

Replacing your Temperature Sensor Kit

Customer Repair Stories

defective temp. sensor

Removed oven from cabinet. unblug old sensor pluged in new and reinstalled oven. Esay repair though wish oven was designed so did not have to pull itout of cabinet which requires disconect electric cabel
  • Armand from COVENTRY, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Oven sensor was not holding temperature range.

Per the instructions included with part.
  • CHARLA from NEW BRAUNFELS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
44 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top