Models > BC280

BC280 Trimmer - Overview

Models starting with BC280

Keep searches simple, eg. "belt" or "pump".
Filter – Part Number: 530150253
Filter
★★★★★
★★★★★
(1)
PartSelect #: PS9005902
Manufacturer #: 530150253
The air filter prevents dirt and debris from entering the engine on your lawn equipment. This is an OEM filter that is white, roughly 2x3.5 inches in dimension, and can only be purchased individually....
$3.81
  In Stock
Carburetor – Part Number: 753-06190
Carburetor
★★★★★
★★★★★
(3)
PartSelect #: PS9119300
Manufacturer #: 753-06190
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes...
$30.42
  In Stock
Pawl Assembly – Part Number: 753-06091
Pawl Assembly
PartSelect #: PS9457214
Manufacturer #: 753-06091
The pawl assembly is a complete OEM kit that includes the two plastic pawls, the two springs, and the metal housing. Installation is rated "Medium" difficulty and requires a screwdriver and socket set...
$7.72
  In Stock
Glide Cap – Part Number: 753-08170
Glide Cap
★★★★★
★★★★★
(2)
PartSelect #: PS10009817
Manufacturer #: 753-08170
$3.97
  In Stock
Carb Kit – Part Number: 545081848
Carb Kit
★★★★★
★★★★★
(1)
PartSelect #: PS9030700
Manufacturer #: 545081848
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines. Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor. Work in a...
$47.16
  In Stock
Starter Pawl Bridge – Part Number: 503873305
Starter Pawl Bridge
★★★★★
★★★★★
(2)
PartSelect #: PS9282878
Manufacturer #: 503873305
The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue,...
$28.04
  In Stock
Boom Assembly, Lower – Part Number: 753-08164
Boom Assembly, Lower
★★★★★
★★★★★
(3)
PartSelect #: PS10009815
Manufacturer #: 753-08164
$19.73
  In Stock
Fuel Tank Assembly – Part Number: 753-06250
Fuel Tank Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS9118306
Manufacturer #: 753-06250
$18.80
  In Stock
Clutch Assembly, Small – Part Number: 753-05860
Clutch Assembly, Small
★★★★★
★★★★★
(2)
PartSelect #: PS9303676
Manufacturer #: 753-05860
$21.99
  In Stock
Spring-Trigger – Part Number: 530016454
Spring-Trigger
PartSelect #: PS9004040
Manufacturer #: 530016454
$6.36
  Special Order
Air Cleaner Gasket – Part Number: 753-06253
Air Cleaner Gasket
PartSelect #: PS10009619
Manufacturer #: 753-06253
$2.99
  In Stock
Switch – Part Number: 791-182405
Switch
PartSelect #: PS10014381
Manufacturer #: 791-182405
This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your ...
$9.07
  In Stock

Common Symptoms of models starting with BC280

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Carburetor replacement
Removed 2 screws securing the air cleaner and carburetor to the engine using a T25 Torx driver. then removed the throttle cable from the carb.Then removed the o ring gasket from the engine and replaced with a new one and replaced the carb etc. Primed it and fired it up.Runs just like new.
Parts Used:
Carburetor O-Ring Carburetor
  • William from PALMETTO, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
Parts Used:
Kit, Piston/Cylinder
  • David from ENID, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trimmer Would Not Start
The replacement of the carburetor, O-ring, and gasket was simple. I removed 2 screws that held the air cleaner and carburetor in place, swapped them out, and replaced the screws. What took longest was finding a piece of fuel line after breaking one of them. It was brittle after hanging in my garage for several years. I found some in my garage and replaced it. It took a few pulls to get it started, but ran very smooth.

Additional information: rather than mixing my fuel, I purchased 40:1 pre-mix fuel to prevent gunking up the carburetor in the future. I use it in my other trimmer and have not had any issues.
Parts Used:
Air Cleaner Gasket Carburetor O-Ring Carburetor
  • Ricardo from FORT WORTH, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!