AZ41E12DABW2 General Electric Air Conditioner - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Air filters needed to be replaced.
-
Vern from Charlestown, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shroud broke
Step 1: un-plug unit and remove front cover
Step 2: remove the (4) four screws holding the air conditioner unit in the wall and pull the air conditioner unit out of wall (takes 2 people)
Step 3: remove screws holding the shroud and the bracket for the fan
Step 5: remove screw holding fan blade from motor
Step 6: install new shroud and screw that holds the shroud to bracket
Step 7: reinstall the new shroud and and then reverse the process putting the screws back in place and reinstall the unit back into the wall
Step 2: remove the (4) four screws holding the air conditioner unit in the wall and pull the air conditioner unit out of wall (takes 2 people)
Step 3: remove screws holding the shroud and the bracket for the fan
Step 5: remove screw holding fan blade from motor
Step 6: install new shroud and screw that holds the shroud to bracket
Step 7: reinstall the new shroud and and then reverse the process putting the screws back in place and reinstall the unit back into the wall
Parts Used:
-
Ruth from SAINT CHARLES, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!