Models > ALW432RAW > Instructions

ALW432RAW (PALW432RAW) Amana Washer - Instructions

All Instructions for the ALW432RAW
136 - 138 of 138
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Idler pulley bad, needs replaced
Repair went well using posted instructions. My advice is always replace pump as you will damage seal when pulling pump off shaft.
Parts Used:
Idler Pulley Wheel
  • Mark from Asotin, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Washer Had No Cold Water
Took off part and replaced it very easy instructions.
Parts Used:
Water Inlet Valve Kit Single Washer Inlet Strainer
  • lucinda from trilla, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking under the washer
Removed old hose, drained the water from the hose. Put new hose on.
Parts Used:
Drain Hose with Rubber Elbow
  • Laura from Westfield, MA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ALW432RAW
136 - 138 of 138
Back to Top