Models > AGM24DH

AGM24DH General Electric Air Conditioner - Overview

Sections of the AGM24DH

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
FAN,AXIAL – Part Number: 5900A10011D
FAN,AXIAL
★★★★★
★★★★★
(4)
PartSelect #: PS12747825
Manufacturer #: 5900A10011D
$61.76
  In Stock
Order within the next 6 hrs and your part ships today!
CLAMP,SPRING – Part Number: MBU64446301
CLAMP,SPRING
★★★★★
★★★★★
(1)
PartSelect #: PS16224004
Manufacturer #: MBU64446301
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$6.37
  In Stock
Order within the next 6 hrs and your part ships today!
Panel,Control – Part Number: 3720A10112A
Panel,Control
PartSelect #: PS3521457
Manufacturer #: 3720A10112A
  No Longer Available
Filter Assembly,Air Cleaner – Part Number: 5231A20027A
Filter Assembly,Air Cleaner
★★★★★
★★★★★
(1)
PartSelect #: PS3527546
Manufacturer #: 5231A20027A
$20.85
  In Stock
Order within the next 6 hrs and your part ships today!
THERMISTOR ASSEMBLY,NTC – Part Number: EBG61106846
THERMISTOR ASSEMBLY,NTC
PartSelect #: PS7792287
Manufacturer #: EBG61106846
$14.76
  On Order
INSTALL PART ASSEMBLY,SINGLE – Part Number: AET73691406
INSTALL PART ASSEMBLY,SINGLE
PartSelect #: PS12714363
Manufacturer #: AET73691406
$76.25
  On Order
Motor,AC – Part Number: 4681A20043K
Motor,AC
PartSelect #: PS3523174
Manufacturer #: 4681A20043K
$263.52
  Special Order
Fan,Turbo – Part Number: 5900A20045B
Fan,Turbo
PartSelect #: PS3528600
Manufacturer #: 5900A20045B
$25.30
  Special Order
Shroud – Part Number: 4998A10035A
Shroud
PartSelect #: PS3525405
Manufacturer #: 4998A10035A
  No Longer Available
Damper,Compressor – Part Number: 5014A20003A
Damper,Compressor
PartSelect #: PS3525905
Manufacturer #: 5014A20003A
$7.31
  In Stock
Order within the next 6 hrs and your part ships today!
Harness,Multi – Part Number: 6631A30003A
Harness,Multi
PartSelect #: PS3529377
Manufacturer #: 6631A30003A
$7.31
  Special Order
REMOTE CONTROLLER ASSEMB – Part Number: 6711A20093L
REMOTE CONTROLLER ASSEMB
PartSelect #: PS3602581
Manufacturer #: 6711A20093L
  No Longer Available

Questions And Answers for AGM24DH

Be the first to ask our experts a question about this model!

Common Symptoms of the AGM24DH

[Viewing 1 of 1]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
accumulated condensation caused condenser fan failure
Pull the unit out of cabinet. Remove the brace between the blower housing and the condenser frame. Remove the screws securing the the condenser coil to the base and carefully lift and angle it just enough for the broken fan to clear ( be very careful with the refrigerant lines ). Slide the new fan back on the shaft and secure with the spring clamp. I used a pair of vice grips to compress the clamp, but be very careful because the clamp can exit the pliers, if the jaws are not perpendicular to the clamp. If you live in a area with high humidity remove the rubber plug at the back of the unit or the condensation will break your new fan. This fan needs some changes in design because the condensation puts too much stress on the plastic that contacts the motor shaft - some metal between shaft and the blades would help.
Parts Used:
FAN,AXIAL CLAMP,SPRING
  • Sam from MCQUEENEY, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Fan
Part of the fan blade broke on my AC unit and was causing a vibration. This made the AC unusable. The ordered Fan was a perfect OE replacement. I simply removed the outside over and then the fan shroud inside the unit. I carefully repositioned the condenser unit being careful not to damage the fins. Using a pair of pliers, I removed the retainer clip and removed the old fan. The new fan slid right over the shaft. I replaced the retaining clip and then repositioned the shroud. Then I placed the condenser and fins back into place and then placed the cover back over the unit. Worked perfect. No issues. Take your time. Excellent replacement fan!
Parts Used:
FAN,AXIAL
  • April from EASLEY, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!