Models
>
AGD12AAG1
AGD12AAG1 Air Conditioner - Overview
Models starting with AGD12AAG1
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Fan Assembly,Axial
PartSelect #: PS3528606
Manufacturer #: 5900AR1173A
The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air ...
No Longer Available
Room Air Conditioner Installation Kit
PartSelect #: PS7784777
Manufacturer #: 3127A20074Y
The installation kit contains the hardware you need to install the room air conditioner.
$48.05
On Order
Frame Guide - Black
PartSelect #: PS274402
Manufacturer #: WJ05X10024
This part attaches to the curtain to help hold it in place.
$17.81
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fan blade was broken
Took cabinet off. Loosened rear condenser and moved it out of the way. Took fan blade off of motor shaft and replaced. Actually broke off small part of blade hub tapping it on to the shaft with a hammer - use a block of wood to protect!
Parts Used:
-
Jonathan from Baltimore, MD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan had stripped out and was replacing.
very tight working situations. made a mistake with a delicate piece of the fan and broke it and that rendered the part unuseful. Since I broke it I considered it to be my fault and just threw it away. Ordered another from another company hoping that just maybe it would be more durable. It arrived in only 4 days. Yours took well over
... Read more
a week to arrive. Thanks for asking for my experience.
Read less
Parts Used:
-
Douglas from ENGLEWOOD, TN
-
Difficulty Level:Very Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!