ACQ062XJ0 Whirlpool Air Conditioner - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Erratic cycling of the compressor.
Received the thermost from you in 2 days. (fast and reasonable shipping)
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Removed 2 control knobs and front cover.
Removed 2 screws holding controls mounting plate. (About 3 X 6 inches in size)
Removed 2 screws holding thermostat in place.
Installed new trhermostat.
Checked the RAC and all was OK.
As a matter of fact, I had to wait for the wife to finish cleaning the front of the RAC.
I am 75years young, retired, repaired appliances for a a short period when I was young before becoming a Factory sales rep. for RCA corp.
I appreciate your fast service and accurately sending me the actual part that I ordered.
Thanks again,
Frank
Parts Used:
-
Frank from Prince Frederick, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no on/off knob
-
Susan J from Oneonta, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Power Cord was sliced
I opened up the front of the A/C got the part/model#, removed front grill and protective cover and was able to swap out the cord for $45 as opposed to buying a new one.
Parts Used:
-
Joan from White Horse Beach, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!