Models > 917374422

917374422 Craftsman Lawn Mower - Overview

Sections of the 917374422

[Viewing 1 of 1]
Diagram and Parts List for Craftsman Lawn Mower
Keep searches simple, eg. "belt" or "pump".
Wheel – Part Number: 532401274
Wheel
★★★★★
★★★★★
(1)
PartSelect #: PS9016096
Manufacturer #: 532401274
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part.
$34.86
  In Stock
Blade, 22" – Part Number: 532406713
Blade, 22"
PartSelect #: PS9017810
Manufacturer #: 532406713
This blade is sourced directly from the manufacturer for use in Craftsman and Husqvarna lawn mowers. The blade is the part of the mower that is responsible for cutting and mulching the grass. It is 22...
$15.90
  In Stock
Cover, Dust, Wheel – Part Number: 581840401
Cover, Dust, Wheel
★★★★★
★★★★★
(3)
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
  In Stock
Engine Zone Control Cable – Part Number: 532183567
Engine Zone Control Cable
★★★★★
★★★★★
(2)
PartSelect #: PS9015022
Manufacturer #: 532183567
This zone control cable is for lawn mowers. Zone control cable stops the engine when you let go of the handle.
$14.93
  In Stock
Handle Knob – Part Number: 532185577
Handle Knob
PartSelect #: PS9020379
Manufacturer #: 532185577
$3.99
  In Stock
Pinion – Part Number: 532403849
Pinion
PartSelect #: PS9016131
Manufacturer #: 532403849
$6.21
  In Stock
E-Ring 7/16 – Part Number: 812000058
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
  In Stock
Nut, Hex, Flangelock – Part Number: 532409149
Nut, Hex, Flangelock
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$4.99
  In Stock
Hardened Washer – Part Number: 532851074
Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
  In Stock
Hex Head Screw 3/8-24x1-3/8 Gr. 8 – Part Number: 532851084
Hex Head Screw 3/8-24x1-3/8 Gr. 8
PartSelect #: PS9026163
Manufacturer #: 532851084
$4.99
  In Stock
V-Belt – Part Number: 532196857
V-Belt
PartSelect #: PS9287063
Manufacturer #: 532196857
$17.43
  In Stock
Spring – Part Number: 532193000
Spring
PartSelect #: PS9016049
Manufacturer #: 532193000
$7.46
  In Stock
View More
Back to Top

Questions And Answers for 917374422

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 917374422

[Viewing 1 of 1]
Mower blade does not cut
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Parts Used:
Engine Zone Control Cable
  • James from ASHTABULA, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Read less
Parts Used:
Wheel
  • Russ from ALTENBURG, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top