Models
>
917289570
917289570 ((YTH 2348)(2010-04) (Sears)) Craftsman Lawn Mower - Overview
Sections of the 917289570
[Viewing 14 of 14]
Keep searches simple, eg. "belt" or "pump".
Aluminum Push Rod
PartSelect #: PS9073139
Manufacturer #: 690982
This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and wi...
$8.27
In Stock
Cylinder Head
PartSelect #: PS9152257
Manufacturer #: 796231
This is a replacement cylinder head kit for your small engine. It contains everything you will need to replace a damaged cylinder head. This is a 12-piece kit that is sold as a unit. This is an OEM pa...
$181.00
On Order
Cylinder Head
PartSelect #: PS9140434
Manufacturer #: 796232
This is the replacement cylinder head for your small engine. This is a 15-piece kit that will allow you to rebuild the cylinder head for the engine on your outdoor power equipment. The cylinder head i...
$187.88
Special Order
Carburetor Overhaul Kit
PartSelect #: PS9138632
Manufacturer #: 797890
This carburetor overhaul kit is a manufacturer-approved kit which contains replacement parts for your outdoor power equipment engine. The kit includes gaskets, o-rings, and diaphragms needed to perfor...
$86.92
On Order
Jet-Main (Standard) (Right Or Cylinder 2)
PartSelect #: PS9140137
Manufacturer #: 791502
$19.04
In Stock
Questions And Answers for 917289570
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Engine quit due to valve guide sliding out causing rocker arm to be immovable resulting in bent push rods.
Clean engine with a Gunk type product. Remove valve cover. Loosen bolts and remove old cylinder head. One bolt is located inside valve cover area. Remove old gasket and inspect and clean that surface. Attach new head with new gasket using existing bolts. Torque to 18'#s with a cross type pattern. Attach new rocker arms and push rods. Set
... Read more
valve clearance to .004 - .006. Attach valve cover with gasket. Check oil level. Start and let it warm up. Let cool remove cover then check valve clearance again. Replace cover.
Read less
Parts Used:
-
D from HUNTSVILLE, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost my main jets while cleaning old gas from carb.
I removed the fan shroud, the carb/manifold as an assembly,turned the carb upside down and removed the fuel bowl. I replaced only one jet. Not until this moment did I discover their were two jets in this nikki carb. I now have a second jet ordered and will install it Friday,hopefully. These jets are two different part numbers as one is a
... Read more
left jet and the other is a right one. Be careful when opening the fuel bowl as these jets are held in their bores by small O-rings, and nothing else. The brigg's and Stratton part numbers are 791501 for the left jet and 791502 for the right.
Read less
Parts Used:
-
dan from EASTPORT, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench set
8 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!