Models > 85TA-4K > Instructions

85TA-4K Magic Chef Cooktop - Instructions

All Instructions for the 85TA-4K
1 - 12 of 12
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The grommets came apart metal from rubber.
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
Parts Used:
Rubber Grommet
  • Frank from Pierce, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
range top loose, grommets missing
very easy to push each grommet into range top holes
Parts Used:
Rubber Grommet
  • joseph from wildomar, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
igniter would no longer work, it would stick
pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.
Parts Used:
Igniter Knob Burner Control Valve with Igniter
  • Randall from Rochester, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing gromet
Pushed into hole by hand, really simple
Parts Used:
Rubber Grommet
  • Hal from National City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old knob is broken
This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.
Parts Used:
Igniter Knob
  • DONNA from WARREN, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't ignite
Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done
Parts Used:
Burner Control Valve with Igniter
  • William from ARCHER, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter failed
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
Parts Used:
Burner Control Valve with Igniter Range Surface Burner Igniter Wire Harness
  • Paul from Niland, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost on of the Rubber Grommet holding the stove grate
So simple would be embarrassed to give any instructions; it is so self evident.
Parts Used:
Rubber Grommet
  • Martin from Millersburg, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The rotating ignitor knob on my RV stove broke
The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.
Parts Used:
Igniter Knob
  • Matthew from Vancouver, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rubber grommet for stove top cover
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job
Parts Used:
Rubber Grommet
  • Lisa from Plymouth, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
range top was missing one of the rubber grommets used to hold the grate.
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
Parts Used:
Rubber Grommet
  • John from Elizabeth, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
original grommets broken
The new grommets were NOT the correct parts, too big, so there was no repair.
Parts Used:
Rubber Grommet
  • William from Richwood, OH
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 85TA-4K
1 - 12 of 12