Models > 80012

80012 LG Microwave - Overview

Sections of the 80012

[Viewing 1 of 1]

Exact Part matches for your search term

[Viewing 3 of 3]
USE PRO TJ80012 – Part Number: 80012
USE PRO TJ80012
This part number matches the current model number 80012
PartSelect #: PS4084504
Manufacturer #: 80012
  No Longer Available
808688 -- Breather gasket set – Part Number: 80012
808688 -- Breather gasket set
This part number matches the current model number 80012
PartSelect #: PS9139738
Manufacturer #: 80012
  No Longer Available
Lid Switch Actuator – Part Number: WP359807
Lid Switch Actuator
This part number matches the current model number 80012
PartSelect #: PS11741878
Manufacturer #: WP359807
This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.
$26.60
  In Stock
Keep searches simple, eg. "belt" or "pump".
Microwave Grease Filter – Part Number: 5230W1A012B
Microwave Grease Filter
★★★★★
★★★★★
(26)
PartSelect #: PS3527528
Manufacturer #: 5230W1A012B
This is a single grease filter manufactured for a microwave. The microwave grease filter filters the exhaust air and traps any grease flowing out of the appliance. It is important to keep the filter c...
$9.23
  On Order
Light Bulb - 120V 30W – Part Number: 6912W1Z004B
Light Bulb - 120V 30W
★★★★★
★★★★★
(8)
PartSelect #: PS3530415
Manufacturer #: 6912W1Z004B
This is a light bulb and it is a part for your microwave. This bulb uses 30 watts, operates on 125 volts, and is an incandescent lamp. The function of this bulb is to illuminate the surface underneath...
$14.05
  In Stock
Air Duct Bracket – Part Number: 4810W1A151A
Air Duct Bracket
★★★★★
★★★★★
(1)
PartSelect #: PS3523851
Manufacturer #: 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
$19.72
  In Stock
Turntable Assembly – Part Number: 5889W2A012F
Turntable Assembly
★★★★★
★★★★★
(4)
PartSelect #: PS3528549
Manufacturer #: 5889W2A012F
This turntable assembly, also known as a rotating ring, is a genuine OEM replacement part for your microwave. It is brown in color and about 10 inches in diameter. This part supports the glass turntab...
$15.14
  In Stock
Plate,Mount – Part Number: 3300W0A030A
Plate,Mount
PartSelect #: PS3518617
Manufacturer #: 3300W0A030A
$35.79
  In Stock
Holder Assembly,Locker – Part Number: 3501W1A019D
Holder Assembly,Locker
★★★★★
★★★★★
(7)
PartSelect #: PS3519053
Manufacturer #: 3501W1A019D
$29.08
  In Stock
Magnetron – Part Number: 6324W1A001L
Magnetron
★★★★★
★★★★★
(4)
PartSelect #: PS3529034
Manufacturer #: 6324W1A001L
$89.37
  In Stock
Grille,Vent – Part Number: 3530W0A038D
Grille,Vent
PartSelect #: PS3519273
Manufacturer #: 3530W0A038D
  No Longer Available
Hardware Mounting Kit – Part Number: 3861W1A043C
Hardware Mounting Kit
★★★★★
★★★★★
(3)
PartSelect #: PS3522503
Manufacturer #: 3861W1A043C
$27.00
  In Stock
Capacitor,High Voltage – Part Number: 0CZZW1H004B
Capacitor,High Voltage
PartSelect #: PS3517241
Manufacturer #: 0CZZW1H004B
$27.17
  In Stock

Questions And Answers for 80012

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 80012

[Viewing 2 of 2]
No heat
Fixed by
these parts
Show All
Won’t turn on
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Magnitron failed
Over the stove microwave installed in top cabinet row.
1. Unplug device.
2. Two people to remove from wall/cabinet (remove two, large, top mounting screws and rotate entire microwave down and off the wall mount). Should be some wood spacers between top of device and bottom of cabinet.
3. Remove screws from sheet metal cover.
4. Remove one screw holding blowers in place and rotate out of the way, in order to gain access to 2 of 5 screws that hold the magnetron in place.
5. Unplug magnetron and remove the 5 screws.
6. Drop in new magnetron and re-assemble microwave in reverse order (steps 5-3).
7. Two people restore micro to wall/cabinet. Replace wood spacers, re-install two, large mounting screws (finger-tight). Test device. Secure the two large screws.
Parts Used:
Magnetron
  • Joseph from WILTON, NH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not start.
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.
Parts Used:
Holder Assembly,Locker
  • James from VIRGINIA BCH, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the switches in a component that door activates when shut.
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
Parts Used:
Holder Assembly,Locker
  • Jimmy from OZARK, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!