7GU3200XTSS0 Whirlpool Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel for upper rack was broken off.
Replaced with ordered part. Was easy to snap into [place.
Parts Used:
-
John from Buckhead, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Machine cycled erratically, then died
Turn off power at breaker. Mine on same breaker as disposal. Removed the twelve torx head screws from inside of door (see the video on replacing the bi-metal fuse). Removed fuse from board, then removed spade connectors to test fuse with multimeter. Blown. Board is snapped in place. Remove the two plugs from the front side of board, the four plugs from the bottom and the ribbon cable. Used a screwdriver to gently bend clips holding board in place at the ribbon cable end of the board and lift out. Examination showed burned area around pin P4, the door neutral pin. Installed new board, re-connected all wires and ribbon cable. Installed new bi-metal fuse just like in video, reassembled door. Turned breaker on, ran normal cycle. Perfect. Wife thinks I'm a genius. Partselect saved me hundreds.
Parts Used:
-
Ralph from Jacksonville, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!