Models
>
7524
7524 Snow Blower - Overview
Models starting with 7524
Click on the best match to narrow your results.
Exact Part matches for your search term
[Viewing 1 of 1]
PAN
This part number matches the current model number 7524
PartSelect #: PS1119547
Manufacturer #: 7903
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Shear Bolt 5/16-18 x 1.5
PartSelect #: PS10001820
Manufacturer #: 710-0890A
This is a shear bolt, also known as a snap-off bolt. This is a fastener designed to break under a specific amount of pressure and protect the machine it is installed on from that excessive load. In la...
$3.99
In Stock
Carriage Bolt, 5/16-18 x .75
PartSelect #: PS10001568
Manufacturer #: 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into pla...
$3.99
In Stock
Bearing, Greased
PartSelect #: PS9270711
Manufacturer #: 2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you w...
$12.07
In Stock
Chute Flange Keeper
PartSelect #: PS10005747
Manufacturer #: 731-0851A
This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the c...
$4.99
In Stock
Plastic Bushing .380 ID
PartSelect #: PS9167515
Manufacturer #: 941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold...
$4.99
In Stock
Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature m...
$9.91
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn belts
-
Fortney Auto Shop from PISCATAWAY, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Parts Used:
![](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9306314-1-S-MTD-790-00121-0637-Shave-Plate-26-amp-34.jpg "Shave Plate 26" – Part Number: 790-00121-0637")
-
John from HARRISVILLE, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench set
4 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!