Models
>
71243
71243 (240000001-240999999 - 2004) Toro Lawn Tractor - Overview
Sections of the 71243
[Viewing 27 of 27]Exact Part matches for your search term
[Viewing 3 of 3]
(B)4" Plastic Rim
This part number matches the current model number 71243
PartSelect #: PS9095483
Manufacturer #: 71243
No Longer Available
Clutch Arm
This part number matches the current model number 71243
PartSelect #: PS11980977
Manufacturer #: 71243
No Longer Available
Fact tag
This part number matches the current model number 71243
PartSelect #: PS12280696
Manufacturer #: 71243
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
In Stock
Gasket--Rocker Cover
PartSelect #: PS8941245
Manufacturer #: 272475S
This OEM Gasket Rocker Cover, which can also be called the Valve Cover Gasket, is used to provide a seal between the valve cover and engine. This is a gray-colored part, measuring 5 1/2 x 4 Inch, and ...
No Longer Available
Seal--Oil (PTO Side)
PartSelect #: PS9151828
Manufacturer #: 795387
This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty...
$7.88
On Order
Cylinder Head Gasket
PartSelect #: PS9142383
Manufacturer #: 796584
This is a replacement cylinder head gasket for your small engine. It is approximately 5 inches in width and 6 inches in length. The cylinder head gasket helps to create a seal for the cylinder head. I...
$21.52
In Stock
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
In Stock
Seal-O Ring
PartSelect #: PS9294749
Manufacturer #: 691917
The Seal-O Ring, also known as the gasket, is red in color, made of rubber, and is an OEM part that requires some skill to replace. This part is designed to create a seal between the carburator and ma...
$4.99
In Stock
Fuel Filter
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$3.99
In Stock
Questions And Answers for 71243
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Attaching the upper part of the cable
EZ if you first remove the gas tank. Take off the LH retainer screw (carb side) but just loosen the RH screw (it's hard to get back in). The retainer will swing out of the way and tank can be removed. Also take a good look at the rubber gas line and replace if needed (really easy and cheap).
When you get the tank out of the ... Read more way, everything's right there.for cable installation,
When you get the tank out of the ... Read more way, everything's right there.for cable installation,
Read less
Parts Used:
-
D. from MILTON, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mow
... Read more
er with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Read less
Parts Used:
-
Emanuel from FERRIDAY, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
4 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
-
Michelle from AYLETT, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!