71227 Toro Lawn Tractor - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Attaching the upper part of the cable
EZ if you first remove the gas tank. Take off the LH retainer screw (carb side) but just loosen the RH screw (it's hard to get back in). The retainer will swing out of the way and tank can be removed. Also take a good look at the rubber gas line and replace if needed (really easy and cheap).
When you get the tank out of the way, everything's right there.for cable installation,
When you get the tank out of the way, everything's right there.for cable installation,
Parts Used:
-
D. from MILTON, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
-
Michelle from AYLETT, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mower with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Parts Used:
-
Emanuel from FERRIDAY, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!