58635 Refrigerator - Instructions

I had the repair man out 5 times. 3 new fans and 2 defrost timers and my refridge still would not work. Spent five minutes on the Parts Select site and found the problem. Ordered the part shich showed up in two days. Steps involved in replacing are as follows. 1)Remove back cover in freezer compartment. 2)locate old Thermostat on top of freezer coil. 3) Mine must have been replaced once before becouse it had cripm connectors ofn the wires just before the thermastate, so cut the wires at the crimp. trimmed the wires on the new part and crimped it the existing wires. 4) place the new thermostat on the Coil and started it back up again. Has worked great for over a week and a half. So nice to have ice again.

Removed bad motor with socket set and pliers then removed the connectors from the old motor and soldered them on the new one. Then installed new motor. Works like new! Problem Solved! Easy fix!

Pulled the fridge out, Took bottom panel off. Removed 3 screws holding motor. Unplugged connector, cut wires, attached old connector on new motor. put blade on new motor.installed in fridge, put cover back on.

Followed the utube video demonstration. There was no instructions for changing the relay and overload and so this part was not used.

The kit I recieved was perfect. All parts fit and where a perfect match. I will give you an A+ in handling my order and shocked by speed of your delivery.