Models
>
5450
5450 - Overview
Models starting with 5450
Click on the best match to narrow your results.
- 5450 Hoover Polisher Buffer (Scrubber)
- 54501 General Electric Washer
- 545011599 ( 2009-08 ) Husqvarna Trimmer (Husqvarna String Trimmer Model 545011599/2009-08 (545011599/200908, 545011599/2009 08) Parts)
- 545011599 ( 2008-11 ) Husqvarna Trimmer (Husqvarna String Trimmer Model 545011599/2008-11 (545011599/200811, 545011599/2008 11) Parts)
- 545012636 Husqvarna Trimmer (Husqvarna String Trimmer Model 545012636 Parts)
- 545014318 Husqvarna Trimmer (Husqvarna String Trimmer Model 545014318 Parts)
- 545014388 Husqvarna Edger (Husqvarna Edger Model 545014388 Parts)
- 545014399 ( 2010-08 ) Husqvarna Lawn Mower (Cultivator Attachment)
Exact Part matches for your search term
[Viewing 2 of 2]
Housing
This part number matches the current model number 5450
PartSelect #: PS9289221
Manufacturer #: 5450
No Longer Available
Clamp
This part number matches the current model number 5450
PartSelect #: PS16990565
Manufacturer #: 5450
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Drain Hose
PartSelect #: PS417877
Manufacturer #: 131461200
This drain hose is designed for use in your washer. The function of this part is to carry water from the drain pump to the house drain. If your washer is leaking or will not drain, you may need to rep...
$20.58
In Stock
Engine Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
$4.99
In Stock
Control Rotary Knob
PartSelect #: PS418709
Manufacturer #: 131761704
Sold Individually. This knob accepts a D-shaped shaft.
$42.49
In Stock
Filter
PartSelect #: PS9005902
Manufacturer #: 530150253
The air filter prevents dirt and debris from entering the engine on your lawn equipment. This is an OEM filter that is white, roughly 2x3.5 inches in dimension, and can only be purchased individually....
$3.99
In Stock
Timer Knob
PartSelect #: PS815514
Manufacturer #: 134191800
This is a genuine timer knob, which works with washers.
$87.65
In Stock
Carb Kit
PartSelect #: PS9030700
Manufacturer #: 545081848
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines.
Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor.
Work in a...
$46.07
In Stock
Common Symptoms of models starting with 5450
[Viewing 5 of 5]Leaking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drain hose was leaking due to small hole in hose
This is the third time I have ordered parts from this company .I can't say enough good things about them from their fast shipping( always arrives sooner than they state)To the quality of the parts and the shipping packages.A first class operation from start to finnish.First step was to disconect power supply.Second was to remove washer dr
... Read more
ain hose from house drain.Third remove two (2) phillips head screws from front cover of washer ,located at bottom right and left side of front panel near floor.Lift front panel up to unhook metal retainers on panel that connect it to washer side panels.Use pliers to remove spring clamp from hose. Remove hose from washer pump. Remove clamp from hose,remove plastic retainer holding hose to washer bottom.Feed hose out the back of the washer through washer drain hose hole in the back pannel of the washer.Remove plastic retainer.Insert the new hose through the hole in the back pannel install the hose clamp and install the hose back on the pump.Relocate clamp on hose, take front panel,lift into place,push down to lock retaining taps into side cover slots replace the two phillips head screws.
Read less
Parts Used:
-
Carl from Wilmington, DE
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
31 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door catch broken
I paid a plumber $150 to replace this part a year ago. I simply took the screws out,ordered the part,paid for 1 day shipping, and screwed the new part on. The washer DID NOT WORK without this part,and worked perfectly the minute I replaced it.
Parts Used:
-
Jennifer from South Chatham, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
Parts Used:
-
David from ENID, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!