Models
>
528SWE
528SWE Cub Cadet Snow Blower - Overview
Models starting with 528SWE
Click on the best match to narrow your results.
- 528SWE ( 2009 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2009 Parts)
- 528SWE ( 2011 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2011 Parts)
- 528SWE ( 2006 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2006 Parts)
- 528SWE ( 2014 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2014 Parts)
- 528SWE ( 2012 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2012 Parts)
- 528SWE ( 2005-2 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2005-2 (528SWE/20052, 528SWE/2005 2) Parts)
- 528SWE ( 2007 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2007 Parts)
- 528SWE ( 2013 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2013 Parts)
- 528SWE ( 2008 ) Cub Cadet Snow Blower (Cub Cadet Snowblower Model 528SWE/2008 Parts)
- 528SWE ( 31AH55TT710 2010 ) Cub Cadet Snow Blower (Snow Thrower)
Keep searches simple, eg. "belt" or "pump".
Shear Pin, .25
PartSelect #: PS9110822
Manufacturer #: 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the...
$3.99
In Stock
Bow Tie Cotter Pin
PartSelect #: PS9096195
Manufacturer #: 714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a k...
$3.99
In Stock
Cable Barrel Holder
PartSelect #: PS9167431
Manufacturer #: 946-0605
This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to s...
$4.99
In Stock
Speed Selector Cable
PartSelect #: PS9166871
Manufacturer #: 946-04396A
This speed selector cable is sourced from the original manufacturer and consists of a cable enclosed in an outer protective casing. It connects the control panel to the transmission/drive system of th...
$19.72
In Stock
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
In Stock
Carriage Bolt, 5/16-18 x .75
PartSelect #: PS10001568
Manufacturer #: 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into pla...
$3.99
In Stock
Fuel Tank
PartSelect #: PS9141053
Manufacturer #: 799863
This is a replacement fuel tank for your outdoor power equipment. It is made of black plastic and comes with the tank itself, as well as the fuel cap. The fuel tank stores fuel before it is transporte...
$98.07
In Stock
Nut, Flange Lock, 3/8-16, Grf
PartSelect #: PS9095080
Manufacturer #: 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also...
$3.99
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The chute rotation assembly was stuck
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part.
... Read more
They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Read less
Parts Used:
-
Ralph from SALT LAKE CTY, UT
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Parts Used:
![](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/9306314-1-S-MTD-790-00121-0637-Shave-Plate-26-amp-34.jpg "Shave Plate 26" – Part Number: 790-00121-0637")
-
John from HARRISVILLE, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench set
4 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!