All Installation Instructions for 42501

Needed to replace the bent blades on my riding mower.

- Made the mower safe to work on the blades (remove spark plug wires, etc.)

- Raised the mower to get access to the blades, wedged a wood block against the blade.

- Used impact driver with socket to remove bolt holding blade.

- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.

Parts Used:

Blade Mower

Trace from LISLE, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Wheel bushings were bad

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.

Parts Used:

Ring Klip Number T5304-75

Cap Axle Black 1 50 x 1 00

Anthony from OLIVEHILL, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

12 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Hit a root with the mower blade which broke the shaft housing.

Remove old blade and blade adapter (important part).Removed nut that holds pulley to the shaft housing, then removed the pulley and put belt out of the way.Used 3/8 air impact to remove bolts that held housing in. Pre-greased th inner housing before installing.New housing mount holes were not threaded so had to get new bolts to fasten. Used 5/16 x 1-1/2" hex heads with lock washers, washers, and Teflon lock nuts. Once mounted, reinstalled the top pulley and belt, tightened top nut, and put on blade adapter at underside of housing. Now ready for new blade.

Parts Used: