2920A Amana Range Parts & Repair Help | PartSelect
Models > 2920A Maytag
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(37)
PartSelect #:PS884734
Manufacturer #:8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...
$6.12
In Stock
(12)
PartSelect #:PS11740783
Manufacturer #:WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your...
$49.44
In Stock
(2)
PartSelect #:PS11757427
Manufacturer #:WPY0060872
The drip pan is found under the burner. This square chrome stovetop drip pan is intended for use with gas ranges. It has a 4-inch diameter center hole and 7 3/4 inch sides. Drip pa...
$12.41
In Stock
(3)
PartSelect #:PS12070192
Manufacturer #:W10900107
$26.80
In Stock
(2)
PartSelect #:PS971245
Manufacturer #:4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...
$33.09
In Stock
(5)
PartSelect #:PS11740785
Manufacturer #:WP3149404
This switch controls the stove top 6" surface burner.
$42.58
In Stock
(1)
PartSelect #:PS11757501
Manufacturer #:WPY07623603
This single oven door side seal is fourteen inches long. It is made of black rubber and it has a metal hook in each end.
$4.12
In Stock
PartSelect #:PS11742283
Manufacturer #:WP4157180
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
$46.50
In Stock
PartSelect #:PS1757448
Manufacturer #:Y07623602
This piece of oven door seal has a metal hook on each end. This seal is compatible with the top and the bottom of the oven door window.
No Longer Available
PartSelect #:PS2011188
Manufacturer #:1430322
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$93.32
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the element did not turn compleatly off, the on light stayed on.

  • Customer: chaz from fairplay, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 71 of 80 people found this instruction helpful
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire fro... read more

Burner would go high without warning

  • Customer: John from Clinton, CT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 45 of 46 people found this instruction helpful
We felt the only possible problem could be the switch assembly. I removed the switch panel, removed the wires from the old switch, one at a time, removed the old switch assembly and installed the new switch assembly. The extended stem did have to be snapped off (per your instructions) and that too was a very simple task. read more

Left front burner would not adjust heat downward

  • Customer: ALTON from ROUND ROCK, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 37 people found this instruction helpful
Pull unit away from wall.
Unplug power
remove topmost four screws from rear metal cover
Pull knob off switch shaft.
Remove two screws holding switch to panel.
Break off shaft of new switch to correct length.
Remove each wire from old switch and attach to Corresponding lug on new switch.
Reattach the new switch to the panel... read more