24A-495D099 MTD Chipper Shredder - Overview

Fuel Line Clamp The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers... Add to cart

Blade-Flail This manufacturer certified flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced, depending on the extent of the damag... Add to cart

Washer-Lock 5/16 This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ... Add to cart

Screw-Flat Head Add to cart

Pin Clip Add to cart

Inlet Needle, Seat, And Clip Assembly

Hex L-Nut 5/16-18 Thd. Add to cart

Screw (1/4-15x7/8) Add to cart

Push Cap The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down... Add to cart

Cap-Fuel (Black) (1-1/2 I D) This black OEM fuel cap (1-1/2 ID) is a black plastic cap which attaches to the fuel tank to keep fuel in and keep debris out. If the cap becomes broken due to wear/damage/fatigue there may be a fuel ...

Air Valve Add to cart

Screw, T-30 Hex Washer Hd Sems, 1/4-20x1/2 Add to cart