24A-464H729 Chipper Shredder - Overview

Flail Blade The flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced. Installation is rated as "Easy" by customers and requires a ... Add to cart

Nut, Flange Lock, 3/8-16, Grf Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also... Add to cart

Jamlock Nut, 3/8-16 The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace... Add to cart

Washer-Lock 5/16 This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ... Add to cart

Screw-Flat Head Add to cart

Hopper Collar This is one of two sides (left and right). If you need both sides, you will need to order two of this part. Add to cart

Hex L-Nut 5/16-18 Thd. Add to cart

Push Cap The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down... Add to cart

Nut, Flange Lock, 1/4-20 Add to cart

Int. Cotter Pin 5/16" Dia. The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...

Hex Nut 5/16-18 Add to cart

Top Locknut, 5/16-18 This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part...