24A-45M4700 Chipper Shredder - Overview

Flail Blade The flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced. Installation is rated as "Easy" by customers and requires a ... Add to cart

Shoulder Pin, .5 X 2.625

★★★★★

★★★★★

(1)

This Shoulder Pin measures .5 X 2.625 is a 5x2.625, and is gold in color. The shoulder pin is used to fasten the flail blade onto the machine. Installation is rated as "Easy" and requires a hammer, pu...

Fuel Bowl O-Ring Fuel Bowl O-Ring Add to cart

Jamlock Nut, 3/8-16 The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace... Add to cart

Nipple Fuel Tank The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose conn... Add to cart

Washer-Lock 5/16 This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ... Add to cart

Screw-Flat Head Add to cart

Hopper Collar This is one of two sides (left and right). If you need both sides, you will need to order two of this part. Add to cart

Hex L-Nut 5/16-18 Thd. Add to cart

Carburetor Gasket Add to cart

Push Cap The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down... Add to cart

Fuel Drain Bolt This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensio...