Models > 21A-422-016

21A-422-016 MTD Tiller - Overview

Models starting with 21A-422-016

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Jamlock Nut, 3/8-16 – Part Number: 712-0266A
Jamlock Nut, 3/8-16
PartSelect #: PS9299545
Manufacturer #: 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace...
$3.99
  In Stock
Order within the next 10 hrs and your part ships today!
Fl-Wash 1.00" X 1.63" O.D. X 03 – Part Number: 936-0163
Fl-Wash 1.00" X 1.63" O.D. X 03
PartSelect #: PS9166464
Manufacturer #: 936-0163
This Flat Washer helps to spread load under a nut or bolt in a wide variety of lawn and garden equipment. Its dimensions are 1.00 inches x 1.63 inches O.D. x 03. This part is silver and made of metal,...
$3.43
  Special Order
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
  In Stock
Order within the next 10 hrs and your part ships today!
Grease Benalene 920 8 Oz – Part Number: 737-0300A
Grease Benalene 920 8 Oz
PartSelect #: PS9119538
Manufacturer #: 737-0300A
$33.18
  In Stock
Order within the next 10 hrs and your part ships today!
Clutch Cable – Part Number: 946-0916
Clutch Cable
PartSelect #: PS9168115
Manufacturer #: 946-0916
$55.66
  On Order
Air Valve – Part Number: 934-0255
Air Valve
PartSelect #: PS9311038
Manufacturer #: 934-0255
$4.99
  In Stock
Order within the next 10 hrs and your part ships today!
Ball Bearing – Part Number: 941-0563
Ball Bearing
PartSelect #: PS9178732
Manufacturer #: 941-0563
This ball bearing is an authentic replacement part used in outdoor power equipment. It has an outer diameter of 1.575 inches and features a retaining ring to secure it in place. It is also double seal...
$36.98
  In Stock
Order within the next 10 hrs and your part ships today!
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
Flat Washer, .760 ID x 1.5 OD – Part Number: 936-0351
Flat Washer, .760 ID x 1.5 OD
PartSelect #: PS9165183
Manufacturer #: 936-0351
This manufacturer-certified Flat Washer 760 ID x 1.5 OD, also known as a Thrust Washer, is a metal part that is silver in color. This part is individually sold, rated as easy to install by our custome...
$3.84
  Special Order
Hairpin Clip – Part Number: 914-0149B
Hairpin Clip
PartSelect #: PS9155191
Manufacturer #: 914-0149B
$3.02
  Special Order
Bell-Washer..63" I.D. – Part Number: 736-0317
Bell-Washer..63" I.D.
PartSelect #: PS9109380
Manufacturer #: 736-0317
$7.64
  In Stock
Order within the next 10 hrs and your part ships today!
Flat Washer, 5/8 X 1.0 X.030 – Part Number: 936-0336
Flat Washer, 5/8 X 1.0 X.030
PartSelect #: PS9311137
Manufacturer #: 936-0336
$4.99
  In Stock
Order within the next 10 hrs and your part ships today!
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it does not make the slight howl sound.
Read less
Parts Used:
Grease Benalene 920 8 Oz
  • LISA M from BATESVILLE, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top