Models > 21027

21027 Toro Lawn Mower - Overview

Models starting with 21027

Exact Part matches for your search term

[Viewing 2 of 2]
6-Inch Plastic, White – Part Number: 21027
6-Inch Plastic, White
This part number matches the current model number 21027
PartSelect #: PS9920662
Manufacturer #: 21027
  No Longer Available
Bearing housing – Part Number: 21027
Bearing housing
This part number matches the current model number 21027
PartSelect #: PS12426692
Manufacturer #: 21027
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Filter- A/C Cartridge – Part Number: 491588S
Filter- A/C Cartridge
★★★★★
★★★★★
(4)
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.06
  In Stock
Carburetor Overhaul Kit – Part Number: 498260
Carburetor Overhaul Kit
★★★★★
★★★★★
(4)
PartSelect #: PS8984098
Manufacturer #: 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of r...
$17.96
  In Stock
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.99
  In Stock
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.91
  In Stock
Gasket-Crankcase – Part Number: 692232
Gasket-Crankcase
★★★★★
★★★★★
(1)
PartSelect #: PS9066140
Manufacturer #: 692232
This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak perfor...
$6.39
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.78
  In Stock
Spring-Air Vane – Part Number: 790849
Spring-Air Vane
★★★★★
★★★★★
(1)
PartSelect #: PS9148751
Manufacturer #: 790849
$6.57
  In Stock
Gasket-Float Bowl – Part Number: 693981
Gasket-Float Bowl
PartSelect #: PS9064482
Manufacturer #: 693981
$4.99
  In Stock
Starter-Rewind – Part Number: 497680
Starter-Rewind
★★★★★
★★★★★
(2)
PartSelect #: PS8981884
Manufacturer #: 497680
This recoil starter is for lawn and garden equipment engines. Recoil starter spins the crankshaft to start the engine when you pull the rope.
$54.25
  In Stock
Ring-Clip, Locking – Part Number: 65-2720
Ring-Clip, Locking
★★★★★
★★★★★
(1)
PartSelect #: PS9052921
Manufacturer #: 65-2720
This OEM Locking Ring holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Installation is rated as "Easy" by customers and will require pliers. The part secure...
$3.99
  In Stock
Plate-Pawl Friction – Part Number: 692299
Plate-Pawl Friction
★★★★★
★★★★★
(1)
PartSelect #: PS9074726
Manufacturer #: 692299
$5.60
  In Stock
Key – Part Number: 612066
Key
PartSelect #: PS9048174
Manufacturer #: 612066
$3.99
  In Stock

Common Symptoms of models starting with 21027

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Parts Used:
Starter-Rewind
  • Seikai from MARICOPA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
Key-Ignition
  • Michelle from AYLETT, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!