Models > 20351

20351 (310000001-310002364 - 2010) Toro Lawn Mower - Overview

Sections of the 20351

[Viewing 6 of 6]

Exact Part matches for your search term

[Viewing 2 of 2]
BRKT-IDLER SUPPORT – Part Number: 20351
BRKT-IDLER SUPPORT
This part number matches the current model number 20351
PartSelect #: PS9451622
Manufacturer #: 20351
  No Longer Available
Flat Washer, 1/4-inch – Part Number: 20351
Flat Washer, 1/4-inch
This part number matches the current model number 20351
PartSelect #: PS16737459
Manufacturer #: 20351
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Washer-Stepped – Part Number: 614426
Washer-Stepped
★★★★★
★★★★★
(1)
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$3.99
  In Stock
Blade-22 Inch – Part Number: 131-4547-03
Blade-22 Inch
★★★★★
★★★★★
(1)
PartSelect #: PS11804777
Manufacturer #: 131-4547-03
This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. Yo...
$24.90
  In Stock
Chute-Discharge, Side – Part Number: 115-8447
Chute-Discharge, Side
★★★★★
★★★★★
(1)
PartSelect #: PS8847392
Manufacturer #: 115-8447
$18.64
  In Stock
Baffle-Front – Part Number: 114-7963-01
Baffle-Front
PartSelect #: PS8845729
Manufacturer #: 114-7963-01
$40.23
  In Stock
Rear Baffle – Part Number: 120-5218
Rear Baffle
★★★★★
★★★★★
(1)
PartSelect #: PS8856278
Manufacturer #: 120-5218
$31.00
  In Stock
Screw-Taptite – Part Number: 95-1726
Screw-Taptite
★★★★★
★★★★★
(1)
PartSelect #: PS9180925
Manufacturer #: 95-1726
$3.99
  In Stock
Bearing-Ball – Part Number: 104-8699
Bearing-Ball
PartSelect #: PS8824569
Manufacturer #: 104-8699
$4.99
  In Stock
Bolt-Shoulder – Part Number: 614650
Bolt-Shoulder
PartSelect #: PS9046634
Manufacturer #: 614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
$4.99
  In Stock
Trailing Shield – Part Number: 144-6431
Trailing Shield
★★★★★
★★★★★
(2)
PartSelect #: PS17016558
Manufacturer #: 144-6431
Trailing Shield
$16.48
  In Stock
V-Belt – Part Number: 117-1018
V-Belt
PartSelect #: PS8849602
Manufacturer #: 117-1018
This is a genuine replacement v-belt sourced from original manufacturer and it is used on Toro lawn mowers. This part is made out of rubber and it is sold individually. This is the the belt that is at...
$21.54
  In Stock
Screw-Hwh – Part Number: 46-8091
Screw-Hwh
PartSelect #: PS8974798
Manufacturer #: 46-8091
$4.99
  In Stock
Grass Bag (Bag Only) – Part Number: 115-4664
Grass Bag (Bag Only)
★★★★★
★★★★★
(1)
PartSelect #: PS8848698
Manufacturer #: 115-4664
$92.84
  In Stock

Questions And Answers for 20351

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hub that the mower blade mounts to was broken
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Parts Used:
Spacer-Driver Blade Driver Assembly
  • randy from HIGHLAND, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
6 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
trailing shield had broken off the mower, rendering bag useless.
Removed the wheels, attached the shield and replace wheels. Easy-peesy!
Parts Used:
Trailing Shield
  • Judy from PRINCETON, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Parts Used:
Arm-Spring
  • Ray from YARDLEY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
3 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!