Models > 20319

20319 Toro Lawn Mower - Overview

Models starting with 20319

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Screw-Taptite – Part Number: 95-1726
Screw-Taptite
★★★★★
★★★★★
(1)
PartSelect #: PS9180925
Manufacturer #: 95-1726
$3.99
  In Stock
Bolt-Shoulder – Part Number: 614650
Bolt-Shoulder
PartSelect #: PS9046634
Manufacturer #: 614650
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
$4.99
  In Stock
Screw-Hwh – Part Number: 46-8091
Screw-Hwh
PartSelect #: PS8974798
Manufacturer #: 46-8091
$4.99
  In Stock
Nut-Lock, Ni – Part Number: 3296-29
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$3.99
  In Stock
Washer – Part Number: 40-1940
Washer
PartSelect #: PS8963619
Manufacturer #: 40-1940
This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appea...
$3.99
  In Stock
Support-Blade – Part Number: 108-3766-03
Support-Blade
PartSelect #: PS9257416
Manufacturer #: 108-3766-03
The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a sock...
$11.20
  In Stock
Guide-Cable – Part Number: 114-7988
Guide-Cable
★★★★★
★★★★★
(1)
PartSelect #: PS8845311
Manufacturer #: 114-7988
$3.99
  In Stock
Knob-Handle, Locking – Part Number: 117-5976
Knob-Handle, Locking
PartSelect #: PS8851479
Manufacturer #: 117-5976
$3.99
  In Stock
Knob-Lever, Hoc – Part Number: 105-3042
Knob-Lever, Hoc
PartSelect #: PS8826626
Manufacturer #: 105-3042
$4.99
  In Stock
Bolt-Blade – Part Number: 117-5270
Bolt-Blade
PartSelect #: PS8851012
Manufacturer #: 117-5270
  No Longer Available
Screw-Carr – Part Number: 3229-11
Screw-Carr
PartSelect #: PS8951165
Manufacturer #: 3229-11
$3.99
  In Stock
Arm-Spring – Part Number: 105-1809
Arm-Spring
PartSelect #: PS8825965
Manufacturer #: 105-1809
$12.39
  In Stock
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel height adjuster lever (spring steel) cracked / split in two.
Tip mower onto side, raising side to be repaired. Empty gas tank if possible or use rags to prevent gasoline drips onto clean surfaces.

Remove wheel using a 1/2" socket.
Remove wheel height assembly with 1/2" socket and open end wrench to hold nut below the deck.
Position new spring arm over the slot on wheel height assembly plate. Check opposite side to verify correct orientation if needed.
Remove plastic cover from old lever using a small flat blade screwdriver. Slip onto new lever.
Replace wheel height assembly.
Replace wheel.
Read less
Parts Used:
Arm-Spring
  • Ray from YARDLEY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top