Models > 20143 > Instructions

20143 Briggs and Stratton Engine - Instructions

All Instructions for the 20143
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
Solenoid-Starter
  • Bruce from CARNATION, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
10 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark
Found you cannot spin it by hand to find out if you have spark. You have to put the recoil back on and spin it this way to find out you have spark. You have to generate enough rpm to create spark. Run's fine know.
Parts Used:
Module-Oil Sensor Switch-Rocker
  • Frank from KENOSHA, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 20143
1 - 2 of 2
Back to Top