Models > 1935-1

1935-1 Husqvarna Generator - Overview

Sections of the 1935-1

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Line-Fuel – Part Number: 791745
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$10.16
  In Stock
Regulator-AVR Control – Part Number: 205858GS
Regulator-AVR Control
★★★★★
★★★★★
(3)
PartSelect #: PS9270265
Manufacturer #: 205858GS
The OEM voltage regulator or voltage control is a part used to regulate the voltage so it can provide the right amount of power to electrical components. It attaches inside the alternator housing. The...
$107.95
  In Stock
Breaker, Circuit, 20A – Part Number: 209872GS
Breaker, Circuit, 20A
PartSelect #: PS9919917
Manufacturer #: 209872GS
This circuit breaker is an important safety device found in the control box of your generator. It protects the electrical system from overloads and short circuits by automatically cutting off the elec...
$10.91
  In Stock
E-Ring – Part Number: 703977
E-Ring
PartSelect #: PS10000220
Manufacturer #: 703977
The OEM E-Ring is a silver metal part used to secure the wheel on the shaft. If broken, the wheel may fall off, and the part must be replaced. It is rated as "Easy" to install and requires pliers and a screw driver.
$4.99
  In Stock
Valve, Fuel – Part Number: 310573GS
Valve, Fuel
PartSelect #: PS9939124
Manufacturer #: 310573GS
$11.05
  In Stock
Valve, Tank – Part Number: 310574GS
Valve, Tank
PartSelect #: PS9939125
Manufacturer #: 310574GS
$11.05
  In Stock
Wheel, 10" Diameter – Part Number: 209636GS
Wheel, 10" Diameter
PartSelect #: PS8914298
Manufacturer #: 209636GS
The authentic 10" Wheel Assembly (Wheel, 10" Diameter) is a 10-inch black, plastic-and-ubber wheel. It allows easy moving of the generator. Installation requires pliers and is rated as "Easy". If your...
$102.60
  In Stock
Assembly, Holder, Brush – Part Number: 66386GS
Assembly, Holder, Brush
PartSelect #: PS9063496
Manufacturer #: 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached spri...
$25.16
  In Stock
Mount, Vibration – Part Number: 87841GS
Mount, Vibration
PartSelect #: PS9308423
Manufacturer #: 87841GS
The OEM vibration mount is a black rubber part, which is used to prevent vibrations between the frame of the generator and the floor. It can be installed with a screw driver,and its installation is ra...
$4.99
  In Stock
BOTTLE, Oil – Part Number: 100005
BOTTLE, Oil
PartSelect #: PS8817222
Manufacturer #: 100005
$5.71
  In Stock
Cover, Rbc Plastic With Cap – Part Number: 195422GS
Cover, Rbc Plastic With Cap
PartSelect #: PS8909587
Manufacturer #: 195422GS
This rear bearing cover is designed to protect and insulate the rear bearing of the engine. It is an authentic OEM replacement part with a diameter of approximately 8 inches. It comes with a center/du...
$14.51
  In Stock
Screw, M5 - .8 X 10 Taptite – Part Number: 74908GS
Screw, M5 - .8 X 10 Taptite
PartSelect #: PS9116859
Manufacturer #: 74908GS
$3.99
  In Stock

Questions And Answers for 1935-1

Be the first to ask our experts a question about this model!