Models
>
13A2785S001
13A2785S001 Lawn Mower - Overview
Models starting with 13A2785S001
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Bow Tie Cotter Pin
PartSelect #: PS9096195
Manufacturer #: 714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a k...
$3.99
In Stock
Bearing, Flange, .760 X .941 X 1.0
PartSelect #: PS9122043
Manufacturer #: 741-0660A
This OEM-manufactured flange bearing supports and enables the smooth rotation of parts in your lawn equipment, such as the blade assembly, axle assembly, or steering components. This bearing has an in...
$3.99
In Stock
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
In Stock
Nut, Flange Lock, 3/8-16, Grf
PartSelect #: PS9095080
Manufacturer #: 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also...
$3.99
In Stock
Nut, Flange Lock, 1/4-20, Grf
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$3.99
In Stock
Lock Ball Joint Assembly
PartSelect #: PS9171232
Manufacturer #: 923-0448A
The Lock Ball Joint Assembly is part of the steering mechanism, and the machine will not be able to steer without it. This part attaches to the steering block and drag link. Installation is rated as "...
$24.65
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oil Drain Sleeve
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Parts Used:
-
Laurie from RICHLANDS, NC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable), Wrench set
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Didn't line up very easy
Put one side in bottom first and you have to slightly twist the lens to get the other clips to pop in.
Parts Used:
-
michael from eden, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Parts Used:
-
LISA M from BATESVILLE, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!