Models > 125-234-000

125-234-000 (1985) MTD Lawn Mower - Overview

Sections of the 125-234-000

[Viewing 2 of 2]
Page A Diagram and Parts List for 1985 MTD Lawn Mower
Page A
Page B Diagram and Parts List for 1985 MTD Lawn Mower
Page B
Keep searches simple, eg. "belt" or "pump".
Nylon Spring – Part Number: 10622BP
Nylon Spring
PartSelect #: PS8832354
Manufacturer #: 10622BP
$4.99
  On Order
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
  In Stock
Carriage Bolt, 5/16-18 X .62" Lg. – Part Number: 710-0260A
Carriage Bolt, 5/16-18 X .62" Lg.
PartSelect #: PS9088287
Manufacturer #: 710-0260A
This genuine OEM carriage bolt is used to secure various parts in lawn and garden outdoor equipment. The bolt has a round head with a square area underneath it that prevents the bolt from turning and ...
$3.99
  In Stock
Hex Wash. Scr. 1/4-14 x .625" Lg. – Part Number: 710-0896
Hex Wash. Scr. 1/4-14 x .625" Lg.
PartSelect #: PS10001824
Manufacturer #: 710-0896
$4.99
  In Stock
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
TT Sems Screw 3/8-16 X 1.0"
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.99
  In Stock
Hex Nut 5/16-18 – Part Number: 912-3010
Hex Nut 5/16-18
PartSelect #: PS9309225
Manufacturer #: 912-3010
$3.29
  Special Order
Bell-Wash. .40" I.D. x .88" O.D. – Part Number: 736-0105
Bell-Wash. .40" I.D. x .88" O.D.
PartSelect #: PS10006502
Manufacturer #: 736-0105
This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers....
$4.99
  In Stock
Screw, 3/8-16, 2.00, Gr5 – Part Number: 710-3144
Screw, 3/8-16, 2.00, Gr5
PartSelect #: PS9089292
Manufacturer #: 710-3144
$4.99
  In Stock
Ball Bearing – Part Number: 941-0484
Ball Bearing
PartSelect #: PS9311596
Manufacturer #: 941-0484
$7.58
  Special Order
Height Adjustment Knob – Part Number: 720-0426
Height Adjustment Knob
PartSelect #: PS10004071
Manufacturer #: 720-0426
  No Longer Available
Extension Spring, .33 OD x 1.12 – Part Number: 932-0357A
Extension Spring, .33 OD x 1.12
PartSelect #: PS9174240
Manufacturer #: 932-0357A
$3.14
  Special Order
View More
Back to Top

Questions And Answers for 125-234-000

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top