Models
>
12200
12200 Briggs and Stratton Engine - Overview
Models starting with 12200
Click on the best match to narrow your results.
- 122002-0138-B8 Briggs and Stratton Engine (Engine)
- 122002-0394-B1 Briggs and Stratton Engine (Engine)
- 122002-0394-B8 Briggs and Stratton Engine (Engine)
- 122002-0394-E1 Briggs and Stratton Engine (Engine)
- 122002-0394-E2 Briggs and Stratton Engine (Engine)
- 122002-0394-E8 Briggs and Stratton Engine (Engine)
- 122002-0496-B1 Briggs and Stratton Engine (Engine)
- 122002-0496-E1 Briggs and Stratton Engine (Engine)
- 122002-0520-B8 Briggs and Stratton Engine (Engine)
- 122002-0783-B1 Briggs and Stratton Engine (Engine)
- 122002-0783-B8 Briggs and Stratton Engine (Engine)
- 122002-0783-E1 Briggs and Stratton Engine (Engine)
- 122002-0783-E8 Briggs and Stratton Engine (Engine)
- 122002-3520-H8 Briggs and Stratton Engine (Engine)
- 122002-3522-H8 Briggs and Stratton Engine (Engine)
- 122002-3523-H8 Briggs and Stratton Engine (Engine)
- 122002-3560-H8 Briggs and Stratton Engine (Engine)
- 122002-3692-H8 Briggs and Stratton Engine (Engine)
- 122002-3783-B1 Briggs and Stratton Engine (Engine)
- 122002-3783-B8 Briggs and Stratton Engine (Engine)
- 122002-3891-H8 Briggs and Stratton Engine (Engine)
- 122007-0139-B8 Briggs and Stratton Engine (Engine)
Keep searches simple, eg. "belt" or "pump".
Filter- A/C Cartridge
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.06
On Order
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.99
In Stock
Kit-Needle/Seat
PartSelect #: PS8963322
Manufacturer #: 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle...
$6.91
In Stock
Fuel Filter
PartSelect #: PS17016257
Manufacturer #: 394358B
This Fuel Filter is a white plastic part attached within the fuel delivery system between the fuel tank and carburetor. Installation is rated as "Easy" and requires a set of pliers and a screwdriver. ...
$3.99
In Stock
Fuel Tank
PartSelect #: PS9141053
Manufacturer #: 799863
This is a replacement fuel tank for your outdoor power equipment. It is made of black plastic and comes with the tank itself, as well as the fuel cap. The fuel tank stores fuel before it is transporte...
$98.07
In Stock
Common Symptoms of models starting with 12200
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Parts Used:
-
Bruce from CARNATION, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
10 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble ... Read more d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
Parts Used:
-
Dana from HAMMOND, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the Carburetor on my Briggs & Stratton Engine
Just removed the old carb and replaced it with the new one. Engine runs like a champ again. All necessary gaskets were included.
Parts Used:
-
craig from COLBERT, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!