Models
>
1207
1207 Troy-Bilt Tiller - Overview
Models starting with 1207
Click on the best match to narrow your results.
- 12070 Troy-Bilt Tiller (Roto Tiller Power Composter)
- 12070 ( 120700100101-UP ) Troy-Bilt Tiller (12070 Horse-Opc (7&8hp) Rototiller (S/N 120700100101-Up))
- 12071 ( 120710100101-UP ) Troy-Bilt Tiller (12071 Horse-Opc (7&8hp) Rototiller (S/N 120710100101-Up))
- 12071 Troy-Bilt Tiller (PTO Horse Tiller)
- 12074 ( 120740100101-120740100150 ) Troy-Bilt Tiller (Horse-Opc (7 And 8hp) Rototiller)
- 12075 ( 120750100101-120750100450 ) Troy-Bilt Tiller (12075 Horse-Opc (7&8hp) Rototiller (S/N 120750100101-120750100450))
- 12075 Troy-Bilt Tiller (Horse Tiller)
- 12077 ( 120770100101-UP ) Troy-Bilt Tiller (3hp Roto-Tiller)
- 120773HP ( 120770100101-UP ) Troy-Bilt Tiller (12077 3hp Roto-Tiller (S/N 120770100101-Up))
- 12079 ( 120790100101-UP ) Troy-Bilt Tiller (Junior Vi Opc (4hp))
- 12079 Troy-Bilt Tiller (12079 Junior Vi Opc (4hp) (S/N 120790100101-Up))
Exact Part matches for your search term
[Viewing 2 of 2]
Bumper Spike - Left
This part number matches the current model number 1207
PartSelect #: PS9466376
Manufacturer #: 1207
No Longer Available
Tape, plastic
This part number matches the current model number 1207
PartSelect #: PS12183621
Manufacturer #: 1207
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Left Hand Bolo Tine
PartSelect #: PS9455672
Manufacturer #: 742-04227-0637
This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to in...
No Longer Available
Right Hand Bolo Tine
PartSelect #: PS9455670
Manufacturer #: 742-04226-0637
The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its i...
No Longer Available
Oil Seal-Wheel Shaft
PartSelect #: PS10027983
Manufacturer #: 921-04031
This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and ...
$10.48
In Stock
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
In Stock
Cable Assembly, Forward Clutch
PartSelect #: PS9463630
Manufacturer #: GW-55048P
No Longer Available
Forward Idler Pulley
PartSelect #: PS9457633
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
No Longer Available
Keyed Washer 1.0 X 0.38 X 0.37
PartSelect #: PS9455313
Manufacturer #: 736-04445
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!