Models > 11A-B26M004 > Instructions

11A-B26M004 (2012) MTD Lawn Mower - Instructions

All Instructions for the 11A-B26M004
1 - 4 of 4
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced existing grass bag
The bag was slightly larger than the original. So the clips along all sides needed to be trimmed slightly to fit the existing frame. 15 minute fix and it works perfect.
Parts Used:
Grass Bag, Black
  • Mark from PHOENIX, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bag will not stay in placed when mower is running.
Repair was not effective. I used once and the bag keep getting off or blown out of the mower.
Parts Used:
Grass Bag, Black
  • Peter from San Diego, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck undercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Parts Used:
Deck , 21in. - Red
  • Mike from NORFOLK, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front axle cover broke
Removed old part and installed new part. Perfect fit.
Parts Used:
Front Axle and Cover Service Kit
  • David from ARLINGTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 11A-B26M004
1 - 4 of 4