Models > 11A-062A372

11A-062A372 ((1999)) Yard Machines Lawn Mower - Overview

Sections of the 11A-062A372

[Viewing 1 of 1]
General Assembly Diagram and Parts List for (1999) Yard Machines Lawn Mower
General Assembly
Keep searches simple, eg. "belt" or "pump".
Bell Blade Support – Part Number: 736-0524B-1
Bell Blade Support
PartSelect #: PS17016260
Manufacturer #: 736-0524B-1
The Blade Support (Bell Blade Support) fits between the bottom of the blade and the blade bolt to provide support for the blade. It is installed underneath the cutting deck on the blade. Installation ...
$6.15
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Blade Adapter – Part Number: 748-0376E
Blade Adapter
PartSelect #: PS10008037
Manufacturer #: 748-0376E
This OEM keyed blade adapter connects your lawn mower blade to the spindle, enabling it to rotate and cut the grass. It has a length of 1.19 inches, an inside diameter of 7/8 inches, and a bow tie cen...
$22.04
  In Stock
Rope Guide – Part Number: 710-1205
Rope Guide
PartSelect #: PS10001864
Manufacturer #: 710-1205
$4.07
  In Stock
Throttle Housing w/o Cable – Part Number: 746-0883
Throttle Housing w/o Cable
PartSelect #: PS10007619
Manufacturer #: 746-0883
$18.04
  In Stock
Hex Bolt 3/8-24 x 1.5" Lg. (Gr. 5) – Part Number: 710-0459A
Hex Bolt 3/8-24 x 1.5" Lg. (Gr. 5)
PartSelect #: PS10001583
Manufacturer #: 710-0459A
This hex bolt is a genuine OEM fastener used in various lawn and garden equipment and machinery. It has a hexagonal shaped head, with a diameter of 3/8 inches. The bolt shaft is 1.5 inches long with 2...
$7.49
  In Stock
TT Sems Screw 3/8-16 X 1.0" – Part Number: 710-0654A
TT Sems Screw 3/8-16 X 1.0"
PartSelect #: PS9100242
Manufacturer #: 710-0654A
$4.32
  In Stock
Screw – Part Number: 710-0599
Screw
PartSelect #: PS10001741
Manufacturer #: 710-0599
  No Longer Available
Bell-Wash. .40" I.D. x .88" O.D. – Part Number: 736-0105
Bell-Wash. .40" I.D. x .88" O.D.
PartSelect #: PS10006502
Manufacturer #: 736-0105
This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers....
$4.57
  In Stock
Hex Bolt – Part Number: 710-1044
Hex Bolt
PartSelect #: PS10001847
Manufacturer #: 710-1044
$4.01
  In Stock
Hex Lock Nut 1/4-20 – Part Number: 712-0324
Hex Lock Nut 1/4-20
PartSelect #: PS10003339
Manufacturer #: 712-0324
$3.99
  In Stock
Bell-Wash. 1/4 I.D. – Part Number: 736-0270
Bell-Wash. 1/4 I.D.
PartSelect #: PS10006551
Manufacturer #: 736-0270
This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it ...
$4.18
  In Stock
View More
Back to Top

Questions And Answers for 11A-062A372

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear flap had deteriorated.
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Parts Used:
Rear Flap (22&#34)
  • David from PITTSBURGH, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top