Models > 11640810

11640810 Kenmore Central Vacuum - Overview

Sections of the 11640810

[Viewing 3 of 3]
Attachment Parts Diagram and Parts List for Kenmore Central Vacuum
Attachment Parts
Installation Replacement Parts Diagram and Parts List for Kenmore Central Vacuum
Installation Replacement Parts
Unit Parts Diagram and Parts List for Kenmore Central Vacuum
Unit Parts
Keep searches simple, eg. "belt" or "pump".
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
  In Stock
Light Bulb - 120v 25w – Part Number: WPA3167501
Light Bulb - 120v 25w
★★★★★
★★★★★
(3)
PartSelect #: PS11747808
Manufacturer #: WPA3167501
This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. T...
$53.91
  On Order
Water Inlet Hose Washer – Part Number: WP16123
Water Inlet Hose Washer
★★★★★
★★★★★
(2)
PartSelect #: PS11738697
Manufacturer #: WP16123
If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Ru...
$7.95
  In Stock
Hose Clamp – Part Number: WP616099
Hose Clamp
PartSelect #: PS11743289
Manufacturer #: WP616099
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original. The hose clamp is about 2 inches in diameter and made of stainless steel...
$9.81
  In Stock
Water Pressure Hose - Cut-to-Fit – Part Number: WP353244
Water Pressure Hose - Cut-to-Fit
★★★★★
★★★★★
(2)
PartSelect #: PS11741846
Manufacturer #: WP353244
This is the hose that tells your appliance if your tub is at the desired water level.
$62.13
  In Stock
Wiring Harness – Part Number: WP5708M003-60
Wiring Harness
PartSelect #: PS11742950
Manufacturer #: WP5708M003-60
  No Longer Available
Screw – Part Number: WP487353
Screw
PartSelect #: PS11742704
Manufacturer #: WP487353
$5.36
  Special Order
NUT- GRIP – Part Number: 7103P022-60
NUT- GRIP
PartSelect #: PS2078807
Manufacturer #: 7103P022-60
$2.56
  Special Order
Wiring Harness – Part Number: WP5708M004-60
Wiring Harness
PartSelect #: PS11742951
Manufacturer #: WP5708M004-60
  No Longer Available
CLAMP – Part Number: 596678
CLAMP
PartSelect #: PS380196
Manufacturer #: 596678
  No Longer Available
MOUNTING BRACKET, KICK PLATE – Part Number: WP486255
MOUNTING BRACKET, KICK PLATE
PartSelect #: PS11742698
Manufacturer #: WP486255
$8.04
  Special Order
SEAL – Part Number: 701425
SEAL
PartSelect #: PS384570
Manufacturer #: 701425
  No Longer Available
View More
Back to Top

Questions And Answers for 11640810

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 11640810

[Viewing 1 of 1]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Back to Top
Replacing the Hose Clamp

Replacing the Hose Clamp

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Light Bulb
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE!
Parts Used:
Light Bulb - 120v 25w
  • Terri from Kingsland, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out lightbulb for over 20 years
Unscrewed back plate, and replaced bulb
Parts Used:
Light Bulb - 120v 25w
  • Kathtleen from Bristol, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light bulb went out in mictowave
Screwed the new “$40” dollar light bulb back into the recessed socket. The new bulb is much smaller that the original bulb and much harder to get fingers into small area where the bulb went. After several try’s, I got it in.
Parts Used:
Light Bulb - 120v 25w
  • Linda from BURSON, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top