Models > 11111

11111 - Overview

Models starting with 11111

Click on the best match to narrow your results.

Exact Part matches for your search term

[Viewing 2 of 2]
FILTER – Part Number: 11111
FILTER
This part number matches the current model number 11111
PartSelect #: PS1405229
Manufacturer #: 11111
  No Longer Available
Starter Pulley--See Service – Part Number: 11111
Starter Pulley--See Service
This part number matches the current model number 11111
PartSelect #: PS9881855
Manufacturer #: 11111
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter Kit – Part Number: 12400035
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(55)
PartSelect #: PS1573892
Manufacturer #: 12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both ...
$57.79
  In Stock
Door Seal - Top – Part Number: WP7212P006-60
Door Seal - Top
★★★★★
★★★★★
(6)
PartSelect #: PS11743943
Manufacturer #: WP7212P006-60
This oven door seal creates a protective seal around an oven door to prevent heat from running out of a closed oven and keeps room air from entering the oven. This part is 17.5 inches long and made o...
$71.04
  In Stock
Oven Door Seal – Part Number: WP7212P003-60
Oven Door Seal
PartSelect #: PS11743942
Manufacturer #: WP7212P003-60
This oven door seal is fifteen and a half inches long. It is made of rubber and has a metal hook on either end to hold it in place. This seal sits on top of the glass window pane.
  No Longer Available
Vertical Side Door Seal – Part Number: WP7212P007-60
Vertical Side Door Seal
PartSelect #: PS11743944
Manufacturer #: WP7212P007-60
$51.55
  In Stock
Window Gasket – Part Number: 7201P017-60
Window Gasket
PartSelect #: PS1643396
Manufacturer #: 7201P017-60
  No Longer Available
Gas Oven Safety Valve – Part Number: 12002128
Gas Oven Safety Valve
PartSelect #: PS1570534
Manufacturer #: 12002128
This valve has a 24" cap tube for natural gas and also comes with a liquid propane orifice.
  No Longer Available
Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242
Bell. Wash. .340 I.D. x .872 O.D.
PartSelect #: PS10006541
Manufacturer #: 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou...
$4.99
  In Stock
Door Glass – Part Number: WP7902P715-60
Door Glass
PartSelect #: PS11744775
Manufacturer #: WP7902P715-60
  No Longer Available
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
  In Stock
Carriage Bolt, 5/16-18 X .62" Lg. – Part Number: 710-0260A
Carriage Bolt, 5/16-18 X .62" Lg.
PartSelect #: PS9088287
Manufacturer #: 710-0260A
This genuine OEM carriage bolt is used to secure various parts in lawn and garden outdoor equipment. The bolt has a round head with a square area underneath it that prevents the bolt from turning and ...
$3.99
  In Stock
Hex Wash. Scr. 1/4-14 x .625" Lg. – Part Number: 710-0896
Hex Wash. Scr. 1/4-14 x .625" Lg.
PartSelect #: PS10001824
Manufacturer #: 710-0896
$4.99
  In Stock
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
View More
Back to Top

Common Symptoms of models starting with 11111

[Viewing 7 of 7]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Gas smell
Fixed by
these parts
Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing
Show All
Back to Top
Replacing the Flat Style Oven Igniter Kit

Replacing the Flat Style Oven Igniter Kit

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would not work but the Broiler did
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don't rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.
Read less
Parts Used:
Flat Style Oven Igniter Kit
  • James from Ferndale, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
337 of 371 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would'nt light
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The new igniter took only 45 minutes to install and supply's 3.6 A/C volts to the gas valve and the oven works fine.
Read less
Parts Used:
Flat Style Oven Igniter Kit
  • Charles from Charlestown, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
130 of 141 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven failed to light
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the igniter in place (I received this stove used and the igniter had evidently been replaced before as it was the same shorter version included in the kit). I pulled the igniter out then removed some insulation and tugged the connector out of the oven floor. I disconnected the igniter and plugged the new one in. I then replaced the connector in the floor, attached the igniter with the screws, replaced the insulation and did a test run (plugged in the oven & turned it on). That was successful so I put the floor back in and put the door back on.
Ta-Dah!
Read less
Parts Used:
Flat Style Oven Igniter Kit
  • Beryl from Dawsonville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
69 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top