110.7095699 Kenmore Dryer Parts and Repair Help
Models > 110.7095699

110.7095699 Kenmore Dryer - Overview

Models starting with 110.7095699

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(102)
PartSelect #:PS334310
Manufacturer #:279834
This is an M series new style coil kit, used in gas dryers. When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils ...
$18.40
In Stock
(77)
PartSelect #:PS334230
Manufacturer #:279570
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer do...
$4.92
In Stock
(69)
PartSelect #:PS1491676
Manufacturer #:W10120998
The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. Whe...
$45.96
In Stock
(61)
PartSelect #:PS334244
Manufacturer #:279640
The idler pulley with tri-ring and gasket, also known as a dryer belt tension pulley wheel, is used in dryers. This part maintains the right amount of tension for the belt to rotat...
$22.10
In Stock
(22)
PartSelect #:PS334180
Manufacturer #:279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder k...
$39.20
In Stock
(2)
PartSelect #:PS11740482
Manufacturer #:WP233520
This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below....
$6.26
In Stock
(40)
PartSelect #:PS11722115
Manufacturer #:661570V
This drive belt is 93 1/2 inches long, and 1/4 of an inch wide, with 4 ribs and 3 grooves. To complete this repair, you will need a Phillips screw driver, a 1/4 inch nut driver, a ...
$23.76
In Stock
(32)
PartSelect #:PS11752609
Manufacturer #:WPW10314173
This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the drum roller only and does not include the tri-rings. This part is sold separately...
$14.76
In Stock
(19)
PartSelect #:PS11746740
Manufacturer #:WP8577274
This internal bias thermostat is a replacement part for your dryer. To replace this part, you will need a putty knife, 5/16ths nut driver, a small flat blade screwdriver, and a 1/4...
$37.27
In Stock
(9)
PartSelect #:PS11741429
Manufacturer #:WP338906
If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor ...
$32.09
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door Catch part had fallen out,/ was missing

Door Catch Kit – Part Number: 279570
  • Customer: Terri from Saint Augustine, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 647 of 686 people found this instruction helpful
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. read more

Dryer ran but would not heat

  • Customer: Gary from Haverhill, NH
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 353 of 393 people found this instruction helpful
PartSelect showed seven different possibilities why the dryer wouldn't heat. I removed the two screws to remove the bottom panel and turned the dryer on and noticed that the heating element that ignites the gas was working fine. This meant that it was not getting gas so it could be the gas valve or one of the two gas valve coils which are located on top of t... read more

felt strip came off lint screen

Lint Filter – Part Number: W10120998
  • Customer: JEFFREY from FALL RIVER, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 208 of 250 people found this instruction helpful
ordered new lint screen, removed old screen, inserted new screen. read more