This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket...
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
This metal retaining ring, otherwise known as a snap ring, holds parts in place in your lawn equipment, such as blades, shafts, pulleys, or other rotating components, to prevent them from sliding off ...
This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appea...
$3.99
In Stock
Questions And Answers for 10642
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
June 3, 2022
How do you change a traction cable on this modle?
For model number 10642
Hello Charles, Thank you for your inquiry. I got this repair information from a previous customer on how they performed this repair then took the time to write in on how it was done.
Remove spark plug wire drain fuel from mower. Remove baffle cover there were five 10mm bolts holding mine. On disconnect spring end of cable from drive belt assembly remove hold down bolt for cable at top of control handle. Unclip cable from mower deck with pliers, its plastic just squeeze it. Remove cable reinstall new one reversing removal instructions, adjust cable for proper motion speed by moving it up or down through the hold down bracket at top of control handle, and your done test mower for proper operation after you finish.
I hope this helps and good luck with your repair.
