1022E ((1696715-01)(2019)) Murray Snow Blower - Overview
Sections of the 1022E
[Viewing 9 of 9]
Keep searches simple, eg. "belt" or "pump".
Screw, Self Tapping, 1/4-15 X 1-1/4
PartSelect #: PS9267782
Manufacturer #: 1751399YP
$4.99
In Stock
Screw, Hex Head Cap M6 1.0 X 12Mm Yz
PartSelect #: PS11838663
Manufacturer #: 7091835YP
$3.99
In Stock
Questions And Answers for 1022E
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scraper bar and flight worn past wear limit.
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl
... Read more
ied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Read less
Parts Used:
-
Duane from RICHFIELD, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!