Models > 09831

09831 - Overview

Models starting with 09831

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(5)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$19.31
  In Stock
Grommet,Tank – Part Number: 83465GS
Grommet,Tank
PartSelect #: PS9307985
Manufacturer #: 83465GS
$5.19
  In Stock
Assembly, Holder, Brush – Part Number: 66386GS
Assembly, Holder, Brush
PartSelect #: PS9063496
Manufacturer #: 66386GS
The brush holder assembly in your generator keeps the brushes in place, allowing them to touch the rotor. It consists of a plastic brush holder and two carbon brushes with lead wires and attached spri...
$25.16
  In Stock
Nut-Lock, Ni – Part Number: 3296-39
Nut-Lock, Ni
PartSelect #: PS9276445
Manufacturer #: 3296-39
$3.99
  In Stock
Outlet, 120/125V, 15/20A – Part Number: 68759GS
Outlet, 120/125V, 15/20A
PartSelect #: PS9294308
Manufacturer #: 68759GS
$27.56
  Special Order
Breaker, Circuit-20A – Part Number: 77247GS
Breaker, Circuit-20A
PartSelect #: PS9135423
Manufacturer #: 77247GS
  No Longer Available
Nut, Locking Hex M8 - 1.25 – Part Number: 52858GS
Nut, Locking Hex M8 - 1.25
PartSelect #: PS9003423
Manufacturer #: 52858GS
$3.99
  Special Order
Bearing – Part Number: 65791GS
Bearing
PartSelect #: PS9293149
Manufacturer #: 65791GS
$35.83
  Special Order
Cap, Fuel – Part Number: 846987
Cap, Fuel
PartSelect #: PS11830156
Manufacturer #: 846987
$22.79
  In Stock
Carrier, Rear Bearing – Part Number: SRV66825DGS
Carrier, Rear Bearing
PartSelect #: PS9322149
Manufacturer #: SRV66825DGS
$110.71
  Special Order
Screw-Hh – Part Number: 323-7
Screw-Hh
PartSelect #: PS8951182
Manufacturer #: 323-7
$3.99
  In Stock
Screw – Part Number: 691103
Screw
PartSelect #: PS9073162
Manufacturer #: 691103
$3.99
  Special Order
View More
Back to Top

Common Symptoms of models starting with 09831

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank
Parts Used:
Fuel Valve W/Bushing
  • Alan from RADFORD, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Parts Used:
Fuel Valve W/Bushing
  • John from LEES SUMMIT, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
5 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top