Models > 0647-0

0647-0 Briggs and Stratton Generator - Overview

Sections of the 0647-0

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Filter- A/C Cartridge – Part Number: 491588S
Filter- A/C Cartridge
★★★★★
★★★★★
(4)
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.53
  In Stock
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.42
  In Stock
Air Cleaner Gasket – Part Number: 795629
Air Cleaner Gasket
★★★★★
★★★★★
(3)
PartSelect #: PS9138757
Manufacturer #: 795629
The Air Cleaner Gasket is used to provide a seal between the air cleaner base, and carburetor. It's a gray, composite material part, which is rated as "Easy" to install and will require a screw driver...
$3.99
  In Stock
Gasket-Crankcase – Part Number: 692232
Gasket-Crankcase
★★★★★
★★★★★
(1)
PartSelect #: PS9066140
Manufacturer #: 692232
This part is the replacement gasket for the crankcase on your engine. The gasket helps to create a seal on the crankcase and prevent leaks. If you notice that your engine is not running at peak perfor...
$5.73
  In Stock
Starter Pawl-Ratchet – Part Number: 281505S
Starter Pawl-Ratchet
PartSelect #: PS8942598
Manufacturer #: 281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will...
$3.94
  In Stock
Kit-Needle/Seat – Part Number: 398188
Kit-Needle/Seat
★★★★★
★★★★★
(1)
PartSelect #: PS8963322
Manufacturer #: 398188
$7.41
  In Stock
Pulley/Spring Assembly – Part Number: 498144
Pulley/Spring Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS8988822
Manufacturer #: 498144
$20.82
  In Stock
Starter-Rewind – Part Number: 497680
Starter-Rewind
★★★★★
★★★★★
(2)
PartSelect #: PS8981884
Manufacturer #: 497680
This recoil starter is for lawn and garden equipment engines. Recoil starter spins the crankshaft to start the engine when you pull the rope.
$119.70
  In Stock
Bowl-Float – Part Number: 796611
Bowl-Float
★★★★★
★★★★★
(1)
PartSelect #: PS9306908
Manufacturer #: 796611
$7.53
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$3.10
  In Stock
Gasket-Cylinder Head – Part Number: 692249
Gasket-Cylinder Head
PartSelect #: PS9064879
Manufacturer #: 692249
$10.64
  In Stock

Questions And Answers for 0647-0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 0647-0

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
starter rewind cord broke
I found the model number of the Briggs & Stratton engine on the inside of the engine housing. Ordered a new starter-rewind unit, as the old cord broke and the thing was well worn. The instructions were clear enough, but to get the old starter off I had to drill out four rivets, which just spin around when you try. I used a hacksaw, chisel, pliers, whatever worked on each rivet; this took a while. When they were finally removed, the new starter pull unit was relatively easy to install with the small nuts and bolts provided. On the Yard Machines log splitter, putting back the engine housing is quite tricky; you have to jostle the thing into place, get the pull handle above the cover and line up the bolt holes.
Parts Used:
Starter-Rewind
  • Seikai from MARICOPA, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace carburetor
Loosened engine cover and moved out of the way
Removed air intake and filter
Loosened and disconnected gas line to carburetor
Unscrewed carburetor and disconnected from throttle arm
Reversed process using new carburetor, O-ring and gasket
Parts Used:
Plug-Spark Carburetor
  • David from KNOXVILLE, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!